FPG7 Fuseholders www.schurter.com/pg02 Shock-Safe Fuseholder, 5 x 20 mm, horizontal, Slot/Fingergrip, SMD, IEC 60335-1 Fingergrip 250 VAC · 2.5 W / 10 A (VDE)16 A (UL/CSA) Description Applications -Surface Mount Device -Meets the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Order number: 3101.0071 / 3101.0076 -Cap is available slotted or fingergrip General Product Information Packaging Details Standards Weblinks -IEC 60127-6 -UL 4248-1 / UL 512 -CSA C22.2 no. 39 -Industrial electronic -Household appliances -Medical equipments References Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) Approvals -VDE License Number: 129098 -UL File Number: E39328 Technical Data Shocksafe Category Fuse-Link Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC Soldering Methods Solderability PC2 5 x 20 mm PCB Solder SMT 250 VAC 10 A (VDE), 16 A (UL/CSA) 2.5 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 40 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 4.4 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Voltage, Power Acc./Current Rating, Approvals Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Fuses Reflow 245 °C / 3 sec acc. to IEC 60068-2-58, Test Td 260 °C / 20 - 40 sec acc. to IPC/JEDEC J-STD-020D < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 2.5 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - II acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc FPG7 Fuseholders www.schurter.com/pg02 Abmessungen 32 mm 37 5 12.7 1.1 1.75 5.08 5.5 ø 1.5 7.6 12.7 Variant 3101.0070 11 ø 11.1 ø 12.5 14.1 4.14 5.5 ø 1.5 1.8 8 7.85 ø 12.5 32.1 5 14.1 4 11 ø 11.1 8 6 7.85 32.1 4.14 1.1 1.75 5.08 7.6 Variant 3101.0075 1.5 3.5 5.5 5.5 17.5 Soldering pads Derating Curves for Fuseholders Admissible power acceptance in Watt 2.5 2.0 I = 1.0 In 1.5 I = 0.7 In I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Variants Holder Cap Material Reflow Condition Remark Order Number l Slot Knob Thermoplastic - will be replaced by 3101.0071 3101.0070 l Slot Knob Spec. Thermoplastic 2 acc. to JEDEC J-STD-020C, Tp=260 +0/-5 °C, tp = 20-40 s Approvals pending 3101.0071 l Fingergrip Thermoplastic - Will be replaced by 3101.0076 3101.0075 l Fingergrip Spec. Thermoplastic 2 acc. to JEDEC J-STD-020C, Tp=260 +0/-5 °C, tp = 20-40 s Approvals pending 3101.0076 Spec. thermoplastic meet the new requirements of IEC 60335-1 Ed. 4.0 for appliances in unattended use (clause 30.2.3). This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-11 to -13. Packaging Unit xxxx.xxxx.D2 Blister Tape 38 cm Reel (250 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.