KBP2005G ~ KBP210G VOLTAGE 50V ~ 1000V Elektronische Bauelemente 2 AMP Bridge Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen-free. 0.600 (15.24) 0.118 x 45 (3.0) o 0.560 (14.22) 0.460 (11.68) FEATURES 0.500 (12.70) 0.460 (11.68) 0.420 (10.67) . Surge overload rating – 60 amperes peak . Ideal for printed circuit board . Plastic material has underwrites laboratory 0.60 (15.24) MIN. Flammability classification 94V-0 . Mounting position: Any 0.50 (12.7) Min. 0.060 (1.52) MAX. 0.034 (0.86) 0.028 (0.76) 0.160 (4.1) 0.140 (3.6) 0.053 (1.35) 0.045 (1.14) 0.200 (5.08) 0.180 (4.57) Dimensions in inches and ( millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz, For capacitive load, derate current by 20%. o TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward o Rectified Output Current @ TA=50 C Peak Forward Surge Current, 8.3 ms single half Sine-wave superimposed on rated load Maximum Forward Voltage Drop Per Bridge Element at 1.0A Peak Maximum Reverse Current at Rated DC Blocking Voltage per Element Maximum Reverse Current at Rated o DC Blocking Voltage per Element @ TC=100 C Typical Junction Capacitance Operating and Storage Temperature Range http://www.SeCoSGmbH.com/ 01-Jun-2006 Rev. B SYMBOL KBP2005G KBP201G KBP202G KBP204G KBP206G KBP208G KBP210G Unit I(AV) 2.0 A IFSM 60 A VF 1.1 V 10 uA 1.0 mA VRRM VRMS VDC IR 50 35 50 100 70 100 200 140 200 400 280 400 Cj 25 TJ, TSTG - 55 ~ + 150 600 420 600 800 560 800 1000 700 1000 V V V pF o C Any changing of specification will not be informed individual Page 1 of 2 KBP2005G ~ KBP210G VOLTAGE 50V ~ 1000V Elektronische Bauelemente 2 AMP Bridge Rectifiers ƔRATING AND CHARACTERISTIC CURVES Fig. 1 — Derating Curve Output Rectified Current 60 60 HZ Resistive or Inductive Load 1.5 P.C.B. Mounted with 0.47 x 0.47" (12 x 12mm) Copper Pads Capacitive Load I(pk) 5.0 = 10 I(AV) (Per Leg) 20 0.5 0 20 Peak Forward Surge Current (A) Average Forward Output Current (A) 2.0 1.0 Fig. 2 — Maximum Non-Repetitive Peak Forward Surge Current Per Leg TJ = 150°C Single Sine-Wave (JEDEC Method) 50 40 30 20 10 1.0 Cycle 0 40 60 80 100 120 140 Ambient Temperature (°C) Number of Cycles at 60 HZ Fig. 3 — Typical Forward Characteristics Per Leg Fig. 4 — Typical Reverse Leakage Characteristics Per Leg 20 100 Instantaneous Reverse Current (µA) Instantaneous Forward Current (A) 100 10 1 160 170 10 1 TJ = 25°C Pulse Width = 300µs 1% Duty Cycle 0.1 0.01 TJ = 125°C 10 1 0.1 TJ = 25°C 0.01 0 0.6 0.4 0.2 1.0 0.8 1.2 1.4 Instantaneous Forward Voltage (V) TJ = 100°C 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 5 — Typical Junction Capacitance Per Leg Junction Capacitance (pF) 100 TJ = 25°C f = 1.0MHZ Vsig = 50mVp-p 10 1 0.1 1 10 100 Reverse Voltage (V) http://www.SeCoSGmbH.com/ 01-Jun-2006 Rev. B Any changing of specification will not be informed individual Page 2 of 2