T2-06 High flow, compact diaphragm pumps FEATURES · Compact size, long life and efficiency · Single or twin head versions · Ideal for use in portable air and gas applications · Up to 6 or 12 lpm free flow, pressure up to 1.3 bar and vacuum up to 576 mbar · Light Duty (LD) and Heavy Duty (HD) DC brush iron core motor options WETTED MATERIALS Diaphragm: EPDM Valve: EPDM Head: PPA ELECTRICAL Voltage Nominal Max. T6...LD... T6...HD... Max. power @ nom. voltage T6SH...LD... T6TH...LD... T6SH...HD... T6TH...HD... Electrical termination August 2007 / 258 SPECIFICATIONS Max. ambient and media temperature 0 to +50 °C 12 or 24 VDC 17 or 32 VDC 19 or 38 VDC Weight T6SH...LD... T6SH...HD... T6TH...LD... T6TH...HD... 163 g 195 g 186 g 218 g 5.2 W 8.4 W 4W 7W solder tabs or 10 inch wire leads 1/4 www.sensortechnics.com T2-06 High flow, compact diaphragm pumps PERFORMANCE CHARACTERISTICS (Standard conditions: 22 °C (70 °F) and 14.7 psia) Part no. Max. flow T6SH...LD... 6 lpm T6TH...LD... 12 lpm T6SH...HD... 6 lpm T6TH...HD... 12 lpm Max. pressure intermittent 1.3 bar (19 psi) continuous 140 mbar (2 psi) 1.3 bar (19 psi) Max. vacuum 576 mbar (17 inch Hg) FLOW CURVES Single head (T6SH...) Twin head (T6TH...) Note: slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. August 2007 / 258 2/4 www.sensortechnics.com T2-06 High flow, compact diaphragm pumps OUTLINE DRAWING T2-06 Single head 3/16 inch hose barb discharge 3/16 inch hose barb suction Ø 1.22 (31.0) for HD motor Ø 1.19 (30.2) for LD motor 1.18 (30.0) 0.47 (11.9) 1.71 (43.4) 1.98 (50.3) 3.19 (81.0) for HD motor 3.11 (79.0) for LD motor 10 inch wires on HD motor (solder tabs on LD motor) 1.66 (42.2) 0.54 (13.7) 0.94 (23.9) 4 x #4-40 UNC 0.15 (3.8) mounting holes third angle projection dimensions in inches (mm) August 2007 / 258 3/4 www.sensortechnics.com T2-06 High flow, compact diaphragm pumps OUTLINE DRAWING (cont.) T2-06 Twin head 3/16 inch hose barb discharge 3/16 inch hose barb suction Ø 1.22 (31.0) for HD motor Ø 1.19 (30.2) for LD motor 3.50 (88.9) for HD motor 3.45 (87.6) for LD motor 1.18 (30.0) 0.47 (11.9) 10 inch wires on HD motor (solder tabs on LD motor) 0.98 (24.9) 2.60 (66.0) 0.63 (16.0) 2.06 (52.3) 4 x #4-40 UNC 0.15 (3.8) mounting holes 0.86 (21.8) third angle projection dimensions in inches (mm) ORDERING INFORMATION Series Options T6 H ead configurations T2-06 SH Single head TH Twin head Mounting options S Standard (barbs on head) Motors* Nominal/max.* voltages Free flow * Valve LD Light duty brush 12 12 / 19 V D C 1 6 lpm (single head) E EPD M * Consult Sensortechnics for premium brush and BLCD motor options Note: T6 SH S E EPD M A PPA 24 24 / 38 V D C 12 lpm (twin head) HD Heavy duty brush Example: Diaphragm Body/head HD * Continuous duty at maximum rated voltage may reduce motor life 12 * at max. rated voltage 1 E E A Custom specific modifications are widely available. Please contact your nearest Sensortechnics sales office for further information. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. August 2007 / 258 4/4 www.sensortechnics.com