DATA SHEET PS196-315: Voltage Controlled Phase Shifter 1.5–3.0 GHz Features Connection Diagram 1500–3000 MHz frequency band ● 65–100-degree phase shift range ● 2 dB insertion loss variation ● 0–12 V control voltage range ● Specified 33 dBm IP3 @ 1900 MHz ● Small footprint LGA package ● Lead (Pb)-free and RoHS-compliant ● VCONTROL RF In/Out 10 pF Control Voltage VCONTROL RF In/Out Description 10 pF The PS196-315 is a voltage controlled phase shifter that employs a monolithic quadrature hybrid and a pair of selected silicon varactor diodes to achieve 100-degree phase shift and low insertion loss. The PS196-315 is packaged in the small outline LGA (Land Grid Array) surface mount package with the internal elements affixed to an organic BT substrate. NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Electrical Specifications at 25 °C ZO = 50 Ω, unless otherwise noted Parameter Phase shift Condition At FO, VCONTROL = 12 V Frequency Min. Typ. Max. Unit 1930–1990 MHz 65 85 100 Deg. 12 V 1 mA Control voltage (VCONTROL) range 0 Control current VCONTROL = 12 V Insertion loss in BW VCONTROL = 0–12 V 1930–1990 MHz 3.3 dB I.L. deviation in BW VCONTROL = 0–12 V 1930–1990 MHz 2 dB 1500–3000 MHz -7 dB Return loss in BW IM3 PIN = 8 dBm, 1900/1905 MHz, VCONTROL = 0 V IP3 Derived from IM3 -50 33 dBc dBm Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200241 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • September 13, 2006 1 DATA SHEET • PS196-315 Typical Performance Data ZO = 50 Ω, unless otherwise noted Mag 0 V Mag 4 V Mag 8 V Mag 1 V Mag 5 V Mag 9 V Mag 2 V Mag 6 V Mag 10 V Mag 0 V Mag 4 V Mag 8 V Mag 3 V Mag 7 V Mag 11 V Mag 12 V Mag 2 V Mag 6 V Mag 10 V Mag 3 V Mag 7 V Mag 11 V Mag 12 V -7 0 Mag 1 V Mag 5 V Mag 9 V -11 -15 Return Loss (dB) Insertion Loss (dB) -1 -2 -3 -19 -23 -27 -31 -35 -4 -39 -43 -5 1.5 1.9 2.1 2.3 2.5 2.7 1.5 2.9 1.7 1.9 2.1 2.3 2.5 2.7 2.9 Frequency (GHz) Frequency (GHz) Magnitude S21 vs. Frequency and Control Voltage Magnitude S22 vs. Frequency and Control Voltage Mag 0 V Mag 4 V Mag 8 V Phase 0 V Phase 3 V Phase 6 V Phase 9 V Phase 12 V Mag 1 V Mag 5 V Mag 9 V Mag 2 V Mag 6 V Mag 10 V Mag 3 V Mag 7 V Mag 11 V Mag 12 V -7 -11 270 -15 230 -19 190 Phase (Degrees) Return Loss (dB) 1.7 -23 -27 -31 -35 Phase 1 V Phase 4 V Phase 7 V Phase 10 V Phase Phase Phase Phase 150 110 70 30 -39 -10 -43 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 Frequency (GHz) Magnitude S11 vs. Frequency and Control Voltage -50 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 Frequency (GHz) Phase S21 vs. Frequency and Control Voltage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 2V 5V 8V 11 V September 13, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200241 Rev. A DATA SHEET • PS196-315 C1 C2 VCONTROL 44 C3 42 B3 GND 36 34 A1 A2 A3 In/Out 38 GND GND B1 40 In/Out Intermod (dBm) 46 GND 48 VCONTROL Pin Out (Bottom View) 50 32 30 0 2 4 6 8 10 12 Terminal No. Terminal Name Control Voltage (V) A1 (Pin 1) In/Out 3rd Order Intermod vs. Control Voltage RF1 = 1.900 GHz, RF2 = 1.905 GHz @ 8 dBm A2 GND A3 In/Out B1 GND B3 GND Absolute Maximum Ratings C1 VCONTROL Value C2 GND RF input power 20 dBm C3 VCONTROL Control voltage 15 V Characteristic Operating temperature -40 °C to +85 °C Storage temperature -65 °C to +150 °C Electrostatic discharge -315 HBM 1 B Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. 0.193 (4.90 mm) ± 0.004 (0.10 mm) Refer to the “Recommended Solder Reflow Profile” Application Note. Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. 8X 0.004 (0.100 mm) ± 0.001 (0.02 mm) CL 0.126 (3.20 mm) ± 0.004 (0.10 mm) CL Detail A 0.063 (1.60 mm) Detail B Pin 1 Indicator 0.091 (2.32 mm) ± 0.003 (0.091 mm) Detail A 0.030 (0.775 mm) ± 0.002 (0.050 mm) 0.031 (0.800 mm) ± 0.002 (0.050 mm) Detail C Recommended Solder Reflow Profiles 0.107 (2.740 mm) ± 0.004 (0.100 mm) Detail B 0.031 (0.800 mm) ± 0.002 (0.050 mm) 0.024 (0.600 mm) ± 0.002 (0.050 mm) Detail C Mold 0.078 (2.00 mm) ± 0.002 (0.05 mm) 0.013 (0.32 mm) ± 0.002 (0.4 mm) Seating Plane Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200241 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • September 13, 2006 3 DATA SHEET • PS196-315 Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 September 13, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200241 Rev. A