SPD3909 Thru SPD3913 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ SPD39 __ __ __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV Level │ │ S = S Level │ │ │ └ Pin Configuration __ = Normal (Cathode │ to Stud) (See Table 1) │ R = Reverse (Anode to │ Stud) └ Family/Voltage 09 = 50V 10 = 100V 11 = 200V 12 = 300V 13 = 400V 30A, 200nsec, 50-400 V Fast Recovery Rectifier Features: • • • • • • • • Maximum Ratings 4/ Peak Repetitive Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 °C, per leg) Operating & Storage Temperature Maximum Total Thermal Resistance Junction to Case SPD3909 SPD3910 SPD3911 SPD3912 SPD3913 Fast Recovery: 200nsec Maximum (100nsec typ.) 3/ Low Reverse Leakage Current Single Chip Construction PIV to 400V, Higher Voltages Available Hermetically Sealed Isolated Package High Surge Rating Replacement for 1N3909, 1N3910, 1N3911, 1N3912, and 1N3913 TX, TXV, and S-Level Screening Available 2/ Symbol Value Units VRRM VRWM VR 50 100 200 300 400 Volts Io 30 Amps IFSM 300 Amps TOP T STG -55 to +150 -65 to +175 ºC RθJC 1.2 ºC/W DO-5: Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA. 4/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0114B DOC SPD3909 Thru SPD3913 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics (per leg) 4/ Symbol Max Units IF = 30A, TA = 25 ºC IF = 30A, TA = -55 ºC VF1 VF2 1.40 1.50 VDC TA = 25 ºC TA = 100 ºC IR1 IR2 80 10 μA mA Maximum Reverse Recovery Time (IF = 500 mA, IR = 1 Amp, IRR = 250 mA) tRR 200 nsec Typical Junction Capacitance (VR = 10VDC, TA = 25ºC, f = 1MHz) CJ 200 pF Maximum Instantaneous Forward Voltage Drop (Pulsed) Maximum Reverse Leakage Current (Rated VR Minimum) Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA. 4/ Unless Specified Otherwise, All Maximum Ratings/Electrical Characteristics are @25°C. Table 1- PIN ASSIGNMENT Code Configuration Terminal Stud __ Normal Anode Cathode R Reverse Cathode Anode DO-5 Outline (Normal Pin Configuration Shown): NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0114B DOC