SAW Filters TMX AT06 SAW Bandpass Filter – Telecom - IF Preliminary Specification (Rev 1) Features................................................................................... P01 Package Drawing & Pin out.................................................... P01 Technical Characteristics ....................................................... P02 Matching Network .................................................................. P02 Nominal Response.................................................................. P03 Maximum Ratings.................................................................... P04 Marking & Packaging .............................................................. P04 TMX AT06 SAW Bandpass Filter – Telecom - IF th Preliminary Specification (Rev.1)- IF February 17 , 2006 Preliminary Specification (Rev 1) Features q IF SAW Filter for Telecom q 190 MHz Center Frequency q 10 MHz useable Passband at 1dB q 50 Ohms Single or Balance Configuration with external matching network q Ceramic package for Surface Mounted Technology Package Drawing & Pin out The product is in conformance with the European RoHs Regulation 2002/95. Pin Configuration Input 3, 2 Input return 2 Output 7, 6 Output return 6 To be ground 1, 4, 5, 8 1 TMX AT06 SAW Bandpass Filter – Telecom - IF th Preliminary Specification (Rev.1)- IF February 17 , 2006 Preliminary Specification (Rev 1) Technical Characteristics Reference Temperature : +25°C Unit Minimum Typical (1) Maximum Source Impedance (single) Ohms - 50 - Load Impedance (single) Ohms - 50 - Electrical Parameters Center Frequency fc MHz - 190 - Bandwidth at 1dB MHz 10 15 - Bandwidth at 3dB MHz - 18 - DC to 100 MHz dB 45 55 - 100 MHz to 149 MHz dB 30 35 - 231 MHz to 250 MHz dB 30 35 - dB dB dB ns 45 - 50 8 0.8 46 10 1 100 Relative Attenuation from minimum insertion loss 250 MHz to 300 MHz Maximum Insertion Loss within 185MHz~195MHz Ripple within 185MHz~195MHz Group Delay within 185MHz~195MHz Matching Network 2 TMX AT06 SAW Bandpass Filter – Telecom - IF th Preliminary Specification (Rev.1)- IF February 17 , 2006 Preliminary Specification (Rev 1) Nominal Frequency Response Frequency Response Frequency Response 3 TMX AT06 SAW Bandpass Filter – Telecom - IF th Preliminary Specification (Rev.1)- IF February 17 , 2006 Preliminary Specification (Rev 1) Maximum Ratings Storage Temperature Range °C [-40°C ; +85°C] Operable temperature Range °C [-40°C ; +85°C] Marking LINE 1 LINE 2 Line 1: "NNNN" is the reference to Temex Part number with only the last 4 digits Line 2: RYWWZZ is the date code as: R: Partner identifier. Y: last digit of the year. WW: number of week in the year ZZ: Lot number in the week (from AA to ZZ). Packaging 3 Scanning Orientation 1 – Temex Label 2 – ESD Prevention Label 3 – Pb Free Label 4