WTE SB10200F

SB10150F – SB10200F
WTE
POWER SEMICONDUCTORS
Pb
10A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
Features
Schottky Barrier Chip
Guard Ring for Transient Protection
Low Forward Voltage Drop
Low Reverse Leakage Current
High Surge Current Capability
Plastic Material has UL Flammability
Classification 94V-O
B
ITO-220A
Dim
Min
Max
A
14.60
15.40
B
9.70
10.30
C
2.55
2.85
D
3.56
4.16
E
13.00
13.80
F
0.30
0.90
G
3.00 Ø
3.50 Ø
H
6.30
6.90
I
4.20
4.80
J
2.50
2.90
K
0.36
0.80
L
2.90
3.30
P
4.83
5.33
All Dimensions in mm
C
G
A
PIN1
3
D
Mechanical Data
F
Case: ITO-220A, Full Molded Plastic
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: See Diagram
Weight: 2.24 grams (approx.)
Mounting Position: Any
Mounting Torque: 11.5 cm-kg (10 in-lbs) Max.
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
E
P
I
H
L
PIN 1 +
J
PIN 3 -
K
Maximum Ratings and Electrical Characteristics
@TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
SB10150F
SB10200F
Unit
VRRM
VRWM
VR
150
200
V
VR(RMS)
105
140
V
IO
10
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
150
A
Forward Voltage
@IF = 10A
VFM
0.92
V
@TA = 25°C
@TA = 100°C
IRM
0.5
50
mA
Cj
700
pF
RθJC
4.0
°C/W
Tj, TSTG
-65 to +150
°C
Peak Reverse Current
At Rated DC Blocking Voltage
@TL = 95°C
Symbol
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal resistance junction to case mounted on heatsink.
SB10150F – SB10200F
1 of 4
© 2008 Won-Top Electronics
30
Single Phase Half-Wave
60 Hz Resistive or Inductive
Load 9.5mm Lead Length
15
10
5
0
10
50
100
150
IF, INSTANTANEOUS FORWARD CURRENT (A)
I(AV), AVERAGE OUTPUT CURRENT (A)
20
10
1.0
Tj = 25ºC
Pulse Width = 300µs
2% Duty Cycle
0.1
0.1
0.5
0.7
0.9
1.1
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Voltage Characteristics
TL, LEAD TEMPERATURE (ºC)
Fig. 1 Forward Current Derating Curve
10000
Tj = 25ºC
f = 1MHz
Cj, JUNCTION CAPACITANCE (pF)
200
IFSM , PEAK FORWARD SURGE CURRENT (A)
0.3
160
120
1000
80
40
8.3ms Single Half Sine-Wave
JEDEC Method
0
1
10
100
1.0
10
100
VR, REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Peak Forward Surge Current
SB10150F – SB10200F
100
0.1
2 of 4
© 2008 Won-Top Electronics
MARKING INFORMATION
WTE
SB10xxF
WTE
SB10xxF
xx
Polarity
= Manufacturer’s Logo
= Device Number
= 150 or 200
= As Marked on Body
PACKAGING INFORMATION
BULK
Tube Size
L x W x H (mm)
Quantity
(PCS)
Inner Box Size
L x W x H (mm)
Quantity
(PCS)
Carton Size
L x W x H (mm)
Quantity
(PCS)
Approx. Gross Weight
(KG)
525 x 31 x 6
50
555 x 145 x 95
2,000
572 x 306 x 218
8,000
19.0
Note: 1. Anti-static tube, water clear color.
RECOMMENDED SCREW MOUNTING ARRANGEMENT
The full molded plastic package affords a
major reduction of hardware as compared
to a standard TO-220 package. However,
precautions should be made in mounting
procedure.
6-32 HEX Head Screw
Plain Washer
A conical washer should be used to apply
proper force to the device. Screw should
not be tightened with any type of air-forced
torque or equipment that may cause crack
on device package.
Rectifier
Heatsink
Conical Washer
6-32 HEX Nut
A layer of thermal grease or thermal pad in
the interface will be considerably helpful for
heat dissipation.
SB10150F – SB10200F
3 of 4
© 2008 Won-Top Electronics
ORDERING INFORMATION
Product No.
Package Type
Shipping Quantity
SB10150F
ITO-220A
50 Units/Tube
SB10200F
ITO-220A
50 Units/Tube
1.
2.
Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
To order RoHS / Lead Free version (with Lead Free finish), add “-LF”
suffix to part number above. For example, SB10150F-LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: [email protected]
Internet: http://www.wontop.com
We power your everyday.
SB10150F – SB10200F
4 of 4
© 2008 Won-Top Electronics