Detector/Amplifier Hybrids With Feedback Resistor SD 112-43-11-221 PACKAGE DIMENSIONS INCH 2 1 3 4 TO-5 PACKAGE See Sheet 2 for Schematic and connection Diagram CHIP DIMENSIONS FEATURES DESCRIPTION APPLICATIONS • Low noise • Red enhanced • Feedback circuit The SD 112-43-11-221 is a detector/amplifier hybrid that combines a silicon photodiode with an opamp with a feedback resistor and capacitor, available in a hermetic TO-5 metal can package. • Instrumentation • Industrial • Medical SPECTRAL SENSITIVITY ABSOLUTE MAXIMUM RATING (TA)= 23°C UNLESS OTHERWISE NOTED 0 Wavelength (nm) ELECTRO-OPTICAL CHARACTERISTICS RATING CHARACTERISTIC Cutoff Frequency Transimpedance Gain Sensitivity Output Offset Voltage Power Supply Current Broadband Noise 10 (TA)= 23°C, VS = ± 12V UNLESS OTHERWISE NOTED TEST CONDITIONS l= 940 nm f= 10Hz to cutoff MIN 0.9 TYP 1 75 4.9x107 6.2 20 MAX ±3 7 UNITS KHz MW V/W mV mA uVrms Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 • www.advancedphotonix.com 1200 * 1/16 inch from case for 3 seconds max. SYMBOL f3db Gain S Vos Is Vn °C 1100 °C 20 1000 +240 °C 900 +100 30 800 Soldering Temperature* -25 mW 40 700 TS 360 50 600 Storage Temperature V 500 TSTG ± 15 400 Power Dissipation UNITS 300 P ±5 MAX 200 Voltage Supplies TYP 6 Vs MIN Sensitivity (10 V/W) 60 SYMBOL PARAMETER Detector/Amplifier Hybrids With Feedback Resistor SD 112-43-11-221 SCHEMATIC AND CONNECTION DIAGRAM 3 0.01 μF 4 1 2 0.01 μF Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. 2