ANAREN RFP-60

60 Watts, 50 Ω
General Specifications
Resistive Element:
Substrate:
Cover:
Mounting Flange:
Thick film
Beryllium oxide ceramic
Alumina ceramic
Copper, nickel plated per
QQ-N-290
99.99% pure silver (.005” thk)
Lead(s):
Features
Flanged Terminations
Model RFP-60-50TPC
Flanged Terminations
Electrical Specifications
• DC - 6.0 GHz
Resistance Value:
Frequency Range:
Power:
V.S.W.R.:
• 60 Watts
• BeO Ceramic
• Welded Silver Leads
50 ohms, ±5%
DC - 6.0 GHz
60 Watts
1.25:1
Notes: Tolerance is ±.010, unless otherwise specified. Operating
temperature is -55°C to +150°C (see chart). Designed to meet or
exceed applicable portions of MIL-E-5400. All dimensions are in
inches. Lead length 0.15” minimum.
Specifications subject to change without notice.
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
.250
.125
.062
RFP
60-50
TPC
.150
MAX.
.122
.515
.125
.116 DIA. THRU.
.050
.125
VER. 12/5/01
Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
1
Flanged Terminations
Model RFP-60-50TPC
Typical Performance
Suggested Mounting Procedures
Power Derating
.025 MIN.
(2 PLACES)
BOARD LOWER
THAN LEAD.
% OF RATED POWER
100
BOARD EVEN
WITH LEAD.
SUGGESTED STRESS RELIEF METHODS
75
SCALE:
50
BOARD LOWER
THAN LEAD.
BOARD HIGHER
THAN LEAD.
NOT RECOMMENDED APPLICATION
SCALE:
1. Make sure that the devices are mounted on flat surfaces
(.001” under the device) to optimize the heat transfer.
25
0
25
50
75
100
CASE TEMPERATURE — °C
125
150
2. Drill & tap the heatsink for the appropriate thread size to be
used.
3. Coat heatsink with a minimum amount of high quality
silicone grease (.001” max. thickness).
4. Position device on mounting surface and secure using
socket head screws, flat & split washers. Torque screws to
the appropriate value. Make sure that the device is flat
against the heatsink. (Care should be taken to avoid
upward pressure of the leads towards the lid).
5. Solder leads in place using an SN63 type solder with a
controlled temperature iron (210°C).
2
Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369