Architectural & Washroom R Accessories INC. U729-1824 JOB #: MEDICINE CABINET ITEM #: Janitorial Washroom Accessories QTY: 16 1/4” 413mm 4 3/4” 121mm 14” 356mm ADJ. SHELVES 23 1/2” 597mm 26 1/4” 667mm s s s 3” 76mm SPECIFICATIONS: RECOMMENDED MOUNTING HEIGHT s s 62” - 64” (1575mm - 1625mm) s 1” 38mm INSTALLATION: Body: Fabricated of one piece deep drawn steel construction, oven baked white enamel finish. Integral louvers to accommodate adjustable shelves. Mirror Door: 3/16” float plate glass, silver coated and sealed elctrolytic cooper plating. Door is secured by means of a magnetic catch. Frame: Bright stainless steel finish. Hinges: Heavy duty piano type hinges. Shelving: Fabricated of high impact plastic. U729-1824: Recessed Medicine Cabinet Overall Size: 18”W x 24”H x 4 3/4”D 457mm x 6610mm x 121mm Wall Opening: 15 7/16””W x 21 1/2”H x 3 5/8”D 394mm x 534mm x 898mm Shelving: 3 adjustable Coordinate installation with architect and or contractor. Provide wall opening 15 7/16”W x 21 1/2”H x 3 5/8”D. This will allow cabinet to swing left or right without interference. Place cabinet in wall opening and secure with proper fasteners per application. Place unit on wall surface and make sure unit is level. Transfer mounting points and drill pilot holes. Secure unit to surface using proper fasteners per application. To meet ADA code, a usable shelf on cabinet cannot be any higher than 44” (1120mm) above the finished floor. (4.2.4) APPLICATION: Form: U730_1626/2000 To provide a recessed white enamel steel medicine cabinet that has adjustable shelves. This information is subject to change without formal notice. If you need additional help, A&J Washroom accessories, Inc. has a technical support staff that is ready to assist you at Fax (845) 562-3391, email: [email protected] or visit our web at http://www.ajwashroom.com Revised Date: 09/01/2000 Copyright 2000 A&J Washroom Accessories, Inc.