PAT Vishay Thin Film Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating FEATURES • Resistance range: 10 Ω to 3 MΩ • AEC-Q200 qualified • AEC-Q200 ESD rated class 1C (2 kV) These chip resistors are available in wraparound terminations styles in 8 case sizes. They incorporate self passivated enhanced tantalum nitride resistor film to give superior performance on moisture resistance, electrostatic discharge, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating (lead (Pb)-free). This product will out-perform all requirements of AEC-Q200. CONSTRUCTION Passivation • Laser trimmed to any value • Moisture resistant to MIL-STD-202, method 202 • Tantalum nitride resistor film on high purity alumina substrate • 100 % visual inspected per MIL-PRF-55342 • Laser-trimmed tolerances to ± 0.1 % • Load life stability < 0.05 % at 1000 h at 70 °C • Very low noise and voltage coefficient (< - 30 dB, < 0.1 ppm/V) • Compliant to RoHS directive 2002/95/EC TYPICAL PERFORMANCE Tantalum Nitride Resistive Film ABSOLUTE Solder Coating Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Tantalum nitride 10 Ω to 3 MΩ ± 25 ppm/°C to ± 100 ppm/°C ± 0.1 % to ± 1.0 % ± 0.05 % Not applicable Less than 0.1 ppm/V 75 V to 200 V - 55 °C to + 150 °C - 55 °C to + 150 °C < - 30 dB 100 ppm CONDITIONS - 55 °C to + 125 °C + 25 °C 2000 h at 70 °C rated power 1 year at 25 °C COMPONENT RATINGS CASE SIZE 0402 0603 0805 1206 1505 2208 2010 2512 POWER RATING (mW) 50 150 200 400 400 750 800 1000 WORKING VOLTAGE (V) 75 75 100 200 150 150 200 200 RESISTANCE RANGE (Ω) 20 to 35K 10 to 80K 10 to 301K 10 to 1M 10 to 1M 10 to 1.75M 10 to 2M 10 to 3M ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Document Number: 60024 Revision: 25-Aug-10 For technical questions, contact: [email protected] www.vishay.com 81 PAT Precision Automotive Thin Film Chip Resistors, AEC-Q200 Qualified, 2 kV ESD Rating Vishay Thin Film DIMENSIONS in inches D T D W T E L L CASE SIZE 0402 0603 0805 1206 1505 2010 2208 2512 L 0.042 ± 0.008 0.064 ± 0.006 0.080 ± 0.006 0.126 ± 0.008 0.155 ± 0.007 0.209 ± 0.009 0.230 ± 0.007 0.259 ± 0.009 W 0.022 ± 0.005 0.032 ± 0.005 0.050 ± 0.005 0.063 ± 0.005 0.050 ± 0.005 0.098 ± 0.005 0.075 ± 0.005 0.124 ± 0.005 T 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 0.015 ± 0.003 D E 0.010 ± 0.005 0.010 ± 0.005 0.012 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.020 + 0.005, - 0.010 0.020 + 0.005, - 0.010 0.015 ± 0.005 0.015 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements) LIMITS TYPICAL VISHAY PER AEC-Q200 PERFORMANCE Resistance Temperature Characteristic - 55 °C to + 125 °C ± 50 ppm/°C ± 35 ppm/°C Max. Ambient Temp. at Rated Wattage + 70 °C + 70 °C Max. Ambient Temp. at Power Derating + 150 °C + 150 °C High Temperature Storage ΔR MIL-STD-202, 108, 1000 h at 125 °C ± 0.1 % + 0.016 % Temperature Cycling ΔR JESD22, JA-104, 1000 cycles, - 55 °C to + 125 °C ± 0.15 % + 0.013 % Moisture Resistance ΔR MIL-STD-202, 106 ± 0.20 % + 0.0010 % Biased Humidity ΔR MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 0.10 % + 0.0297 % Life ΔR MIL-STD-202, 108 at 125 °C, 1000 h ± 0.1 % + 0.0220 % Mechanical Shock ΔR MIL-STD-202, method 213, condition C ± 0.1 % + 0.0130 % Vibration ΔR MIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.1 % + 0.0030 % Resistance to Soldering Heat ΔR MIL-STD-202, 204, condition B ± 0.10 % + 0.0150 % Electrostatic Discharge ΔR AEC-Q200-002 at 2 kV, human body ± 0.10 % - 0.032 % Solderability Visual J-STD-002, method B and B1 95 % Acceptable Terminal Strength ΔR AEC-Q200-006 at 1 kg for 60 s ± 0.10 % + 0.012 % Flame Retardance Visual AEC-Q200-001 para 4.0 Acceptable ENVIRONMENTAL TEST CONDITIONS GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PAT1206E1002BST1 P A T 1 2 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PAT 0402 0603 0805 1206 1505 2010 2208 2512 E = ± 25 ppm/°C H = ± 50 ppm/°C K = ± 100 ppm/°C 0 6 E 1 0 RESISTANCE TOLERANCE The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % J = ± 5.0 % 0 2 TERMINATION S = Wraparound lead (Pb)-free solder w/nickel barrier B S T 1 PACKAGING TAPE AND REEL T1 = 1000 min., 1000 mult (1) TF = Full reel TS = 100 min., 1 mult Example: 10R0 = 10 Ω 1000 = 100 Ω 1002 = 10 kΩ Note (1) Preferred packaging code www.vishay.com 82 For technical questions, contact: [email protected] Document Number: 60024 Revision: 25-Aug-10 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1