DN500F Semiconductor NPN Silicon Transistor Description • Extremely low collector-to-emitter saturation voltage ( VCE(SAT)=0.2V Typ. @IC/IB=3A/150 ㎃) • Suitable for low voltage large current drivers • Excellent hFE Linearity • Complementary pair with DP500F • Switching Application Ordering Information Type NO. Marking Package Code DN500F N5 SOT-89 Outline Dimensions unit : mm 2.40~2.70 1.20 Max. 1.50 Typ. 3.70~4.30 4 KST-8012-003 0.46 Max. 0.10 Max. 1.40~1.70 0.48 Max. 1 1.50 Typ. 2 0.58 Max. 1.87 Max. 4.40~4.70 3 PIN Connections 1. Base 2. Collector 3. Emitter 1 DN500F Absolute maximum ratings (Ta=25°C) Characteristic Symbol Ratings Unit Collector-Base voltage VCBO 15 V Collector-Emitter voltage VCEO 12 V Emitter-Base voltage VEBO 5 V IC 5 A PC 0.5 Collector current Collector power dissipation * W PC 2 Junction temperature TJ 150 °C Storage temperature Tstg -55~150 °C * : When mounted on 40×40×0.8 ㎜ ceramic substate Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=50 ㎂, IE=0 15 - - V Collector-Emitter breakdown voltage BVCEO IC=1 ㎃, IB=0 12 - - V Emitter-Base breakdown voltage BVEBO IE=50 ㎂, IC=0 5 - - V Collector cut-off current ICBO VCB=15V, IE=0 - - 0.1 ㎂ Emitter cut-off current IEBO VEB=4V, IC=0 - - 0.1 ㎂ hFE1 VCE=1V, IC=100 ㎃ 120 - 700 - hFE2 VCE=1V, IC=3A 40 - - - DC current gain Collector-Emitter on voltage VCE(sat1) IC=3A, IB=150 ㎃ - - 0.3 V Base-Emitter on voltage VBE(sat) IC=3A, IB=150 ㎃ - - 1.2 V fT VCB=5V, IC=500 ㎃ - 150 - ㎒ VCB=10V, IE=0, f=1 ㎒ - - 50 ㎊ Transition frequency Collector output capacitance Cob KST-8012-003 2 DN500F Electrical Characteristic Curves Fig. 2 Ic - VBE ㎽ Fig. 1 Pc - Ta Fig. 3 hFE - IC ㎽ Fig. 4 VCE(sat) - IC ㎃ ㎃ KST-8012-003 3 DN500F The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KST-8012-003 4