STA2907AN Semiconductor PNP Silicon Transistor Descriptions • General purpose application • Switching application Features • Large collector current : IC=-600mA • Low collector saturation voltage • Complementary pair with STC2222AN Ordering Information Type NO. Marking Package Code STA2907AN STA2907A TO-92N Outline Dimensions unit : mm 4.20~4.40 4.20~4.40 2.25 Max. 2.14 Typ. 13.50~14.50 0.52 Max. 0.90 Max. 1.27 Typ. 0.40 Max. 1 2 3 3.09~3.29 3.55 Typ PIN Connections 1. Emitter 2. Base 3. Collector KSD-T0C058-000 1 STA2907AN Absolute Maximum Ratings Ta=25°C Characteristic Symbol Rating Unit Collector-base voltage VCBO -60 V Collector-emitter voltage VCEO -50 V Emitter-base voltage VEBO -5 V Collector current IC -600 mA Collector power dissipation PC 400 mW Junction temperature TJ 150 °C Tstg -55~150 °C Storage temperature range Electrical Characteristics Ta=25°C Characteristic Symbol Collector-emitter breakdown voltage BVCEO IC=-1mA, IB=0 -50 - - V Collector cut-off current ICBO VCB=-60V, IE=0 - - -50 nA Emitter cut-off current IEBO VEB=-5V, IC=0 - - -50 nA DC current gain hFE VCE=-10V, IC=-10mA 100 - - - IC=-150mA, IB=-15mA - - -0.4 V Collector-emitter saturation voltage VCE(sat) Test Condition Min. Typ. Max. Unit Base-emitter voltage VBE VCE=-10V, IC=-10mA - -0.66 -0.85 V Transition frequency fT VCE=-20V, IC=-20mA - 250 - MHz VCB=-10V, IE=0, f=1MHz - 6.0 - pF Collector output capacitance Cob KSD-T0C058-000 2 STA2907AN Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 2 IC - VBE Fig. 4 VCE(sat) - IC Fig. 3 IC - VCE Fig. 5 hFE - IC Fig. 6 hFE - IC KSD-T0C058-000 3 STA2907AN The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0C058-000 4