INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ BM02832 • Multi-port shielded RJ-45 connector with integrated Gigabit Ethernet magnetics • Complies with IEEE 802.3ab standards and all Gigabit Ethernet specifications • Compatible with a variety of Gigabit Ethernet transceiver ICs and 10/100Base-TX transceiver ICs • Integrated design conserves valuable board space • Minimum interwinding breakdown voltage of 1500 Vrms • Operating temperature 0° to +70° C • Adaptable, modular design provides higher reliability • Storage temperature -40° to +85° C ELECTRICAL SPECIFICATIONS AT 25° C Insertion Loss dB max Return Loss dB min Part Number Common to Differential Mode Rejection dB min Common to Common Mode Rejection dB min Crosstalk dB min Hipot Vrms min 0.1MHz to 100MHz 100MHz to 125MHz 0.5MHz to 40MHz 40MHz to 100MHz 100KHz to 100MHz 100KHz to 100MHz 0833-2X4R-33 -0.8 -1.2 -18 -12 + 20 log (f/80 MHz) -35 -30 -33 + 20 log (f/100MHz) 1500 0833-2X6R-33 -0.8 -1.2 -18 -12 + 20 log (f/80 MHz) -35 -30 -33 + 20 log (f/100MHz) 1500 0833-2X8R-33 -0.8 -1.2 -18 -12 + 20 log (f/80 MHz) -35 -30 -33 + 20 log (f/100MHz) 1500 0833-2X4R-54 -0.8 -1.2 -18 -12 + 20 log (f/80 MHz) -35 -30 -33 + 20 log (f/100MHz) 1500 0833-2X6R-54 -0.8 -1.2 -18 -12 + 20 log (f/80 MHz) -35 -30 -33 + 20 log (f/100MHz) 1500 0833-2X8R-54 -0.8 -1.2 -18 -12 + 20 log (f/80 MHz) -35 -30 -33 + 20 log (f/100MHz) 1500 Available Options • Various transformer turns ratios • Various high voltage capacitor values ©2002 Bel Fuse Inc. Specifications subject to change without notice. 07.04 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ BM02832 SCHEMATICS 1 0833-2X4R-33 0833-2X6R-33 0833-2X8R-33 RJ45 1CT : 1CT 1 2 3 2 1CT : 1CT 3 4 5 6 1CT : 1CT 4 6 7 5 1CT : 1CT 7 8 8 0.1µF x4 75Ω x4 9 1000pF 2kV 10 Shield 0833-2X4R-54 0833-2X6R-54 0833-2X8R-54 1CT : 1CT 1 RJ45 1 2 2 1CT : 1CT 3 3 4 6 1CT : 1CT 5 4 5 6 1CT : 1CT 7 7 8 8 9 0.1µF x4 75Ω x4 10 1000pF 2kV Shield ©2002 Bel Fuse Inc. Specifications subject to change without notice. 07.04 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2 INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ BM02832 MECHANICAL 0833-2X4R-33 0833-2X4R-54 1.210 [30.73] max Outer Shield 2.330 [59.18] Port 8 Port 2 1.004 [25.50] max 0.150 [3.81] Note * Port 7 Port 1 0.125 [3.18] Housing 0.425 [10.80] 0.185 [4.70] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.010 [0.25] unless otherwise noted. Notes Packing Quantity Plastic Housing Contacts Pins Solderability Metal Shield Thermoplastic, flammability rating UL 94V-0 50 micro-inch hard gold plating Tin-coated copper wire, DIA 0.018" [0.46] Per MIL Std. 202, Method 208 Nickel plated copper alloy 20 pieces finished goods per tray 7 trays per carton box for a total of 140 pieces of finished goods *Jack cavity conforms to FCC rules and regulations, part 68, subpart F. 1.030 +0.010/-0.005 [26.16 +0.25/-0.13] 2.365 +0.010/-0.005 [60.07 +0.25/-0.13] Metal Panel 0.085 ±0.010 [2.16 ±0.25] 0.015 [0.38] Suggested Panel Opening PCB ©2002 Bel Fuse Inc. Specifications subject to change without notice. 07.04 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3 INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ BM02832 PAD LAYOUT 0833-2X4R-33 0833-2X4R-54 2.005 [50.93] 1.600 [40.64] 1.455 [36.96] 1.050 [26.67] 0.905 [22.99] 0.500 [12.70] 0.355 [9.02] ø0.062 0.160 [4.06] [ø1.57] 0.050 [1.27] 7 places ø0.035 [ø0.89] 80 places 0.450 [11.43] 0.680 0.610 [17.27] [15.49] 0.100 [2.54] 0.050 [1.27] 0.185 [4.70] 0.180 [4.57] 0.110 [2.79] ø0.128 [ø3.25] 2 places 0.290 [7.37] R0.030 [R0.76] 0.110 [2.79] 2.100 [53.34] Suggested PCB Pad Layout Component Side View Recommended PCB front edge cutout. The bottom shield ground tabs (front) should not be seated on the top of the PCB. Port 10 9 7 5 3 1 10 88 66 44 1 2 3 4 5 6 7 8 9 7 5 3 1 2.090 [53.09] Note The shaded area of bottom side of part may be covered by metal shield. 1.230 [31.24] 0.535 [13.59] 0.425 [10.80] 0.145 [3.68] 2.390 [60.71] ©2002 Bel Fuse Inc. Specifications subject to change without notice. 07.04 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4 INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ BM02832 MECHANICAL 0833-2X6R-33 0833-2X6R-54 1.210 [30.73] max 3.430 [87.12] Outer Shield 1.004 [25.50] max 0.150 [3.81] 0.125 [3.18] Port 12 Port 2 Note Port 11 Port 1 Housing * 0.425 [10.80] 0.185 [4.70] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.010 [0.25] unless otherwise noted. Notes Packing Quantity Plastic Housing Contacts Pins Solderability Metal Shield Thermoplastic, flammability rating UL 94V-0 50 micro-inch hard gold plating Tin-coated copper wire, DIA 0.018" [0.46] Per MIL Std. 202, Method 208 Nickel plated copper alloy 15 pieces finished goods per tray 7 trays per carton box for a total of 105 pieces of finished goods *Jack cavity conforms to FCC rules and regulations, part 68, subpart F. 1.030 +0.010/-0.005 [26.16 +0.25/-0.13] 3.465 +0.010/-0.005 [88.01 +0.25/-0.13] Metal Panel 0.085 ±0.010 [2.16 ±0.25] 0.015 [0.38] Suggested Panel Opening ©2002 Bel Fuse Inc. PCB Specifications subject to change without notice. 07.04 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 5 INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ BM02832 PAD LAYOUT 0833-2X6R-33 0833-2X6R-54 0.905 [22.99] 0.500 [12.70] 0.355 [9.02] 0.160 [4.06] 0.050 [1.27] ø0.062 [ø1.57] 9 places 3.105 [78.87] 2.700 [68.58] 2.555 [64.90] 2.150 [54.61] 2.005 [50.93] 1.600 [40.64] 1.455 [36.96] 1.050 [26.67] ø0.035 [ø0.89] 120 places 0.450 [11.43] 0.680 [17.27] 0.610 [15.49] 0.100 [2.54] 0.050 [1.27] 0.185 [4.70] 0.180 [4.57] 0.110 [2.79] ø0.128 [ø3.25] 2 places 0.290 [7.37] 0.110 [2.79] R0.030 [R0.76] Recommended PCB front edge cutout. The bottom shield groundtabs (front) should not be seated on the top of the PCB. 3.200 [81.28] Suggested PCB Pad Layout Component SIde View 10 9 7 5 3 1 8 6 4 2 10 8 6 4 2 Port 9 7 5 3 1 1 2 3 4 5 6 7 8 9 10 11 12 3.190 [81.03] Note The shaded area of bottom side of part may be covered by metal shield. 1.230 [31.24] 0.535 [13.59] 0.425 [10.80] 0.145 [3.68] 3.490 [88.65] ©2002 Bel Fuse Inc. Specifications subject to change without notice. 07.04 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 6 INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ BM02832 MECHANICAL 0833-2X8R-33 0833-2X8R-54 1.210 [30.73] max Outer Shield 4.530 [115.06] Port 16 Port 2 1.004 [25.50] max 0.150 [3.81] 0.125 [3.18] Note * Port 15 Port 1 0.425 [10.80] Housing 0.185 [4.70] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.010 [0.25] unless otherwise noted. Notes Packing Quantity Plastic Housing Contacts Pins Solderability Metal Shield Thermoplastic, flammability rating UL 94V-0 50 micro-inch hard gold plating Tin-coated copper wire, DIA 0.018" [0.46] Per MIL Std. 202, Method 208 Nickel plated copper alloy 10 pieces finished goods per tray 7 trays per carton box for a total of 70 pieces of finished goods *Jack cavity conforms to FCC rules and regulations, part 68, subpart F. 1.030 +0.010/-0.005 [26.16 +0.25/-0.13] 4.565 +0.010/-0.005 [115.95 +0.25/-0.13] Metal Panel 0.085 ±0.010 [2.16 ±0.25] 0.015 [0.38] Suggested Panel Opening ©2002 Bel Fuse Inc. PCB Specifications subject to change without notice. 07.04 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 7 INTEGRATED CONNECTOR MODULES 2 x n Multi-port Gigabit belStack™ BM02832 PAD LAYOUT 4.205 [106.81] 3.800 [96.52] 3.655 [92.84] 3.250 [82.55] 3.105 [78.87] 2.700 [68.58] 2.555 [64.90] 2.150 [54.61] 2.005 [50.93] 1.600 [40.64] 1.455 [36.96] 0833-2X8R-33 0833-2X8R-54 1.050 [26.67] 0.905 [22.99] 0.500 [12.70] 0.355 [9.02] 0.160 [4.06] 0.050 [1.27] ø0.062 [ø1.57] 11 places ø0.035 [ø0.89] 160 places 0.450 [11.43] 0.680 [17.27] 0.610 [15.49] 0.100 [2.54] 0.050 [1.27] 0.185 [4.70] 0.180 [4.57] 0.110 [2.79] ø0.128 [ø3.25] 2 places 0.290 [7.37] R0.030 [R0.76] 0.110 [2.79] 4.300 [109.22] Suggested PCB Pad Layout Component SIde View 10 9 7 5 3 1 8 6 4 2 10 8 6 4 2 9 7 5 3 1 Recommended PCB front edge cutout. The bottom shield groundtabs (front) should not be seated on the top of the PCB. Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4.290 [108.97] Note The shaded area of bottom side of part may be covered by metal shield. 1.230 [31.24] 0.535 [13.59] 0.425 [10.80] 0.145 [3.68] 4.590 [116.59] ©2002 Bel Fuse Inc. Specifications subject to change without notice. 07.04 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 8