defining a degree of excellence SMD SINGLE OUTPUT PASSIVE DELAY MODULES Cat 24-R4 Recommended Temperature Profile .300 300o C .375 .350 bel (DC) (P/N) In 1 .285 Max Infra Red Out 4 o 225 C Max Temp. Gnd 8 Gnd 5 200o C > 185o C for 90 Seconds Max 100o C .015 .004 .22 Max Temp. .50 Max 4o .012 .008 .018 Coplanarity + .002 0 2 4 6 8 Time in Minutes .030 Part Numbers XX = Zo Total Delay 0.0 + 0.20 * S407-0000-00 S407-00.5-XX 0.5 + 0.20 S407-0001-XX 1.0 + 0.20 S407-01.5-XX 1.5 + 0.20 S407-0002-XX 2.0 + 0.20 S407-02.5-XX 2.5 + 0.20 S407-0003-XX 3.0 + 0.20 S407-03.5-XX 3.5 + 0.20 S407-0004-XX 4.0 + 0.20 S407-04.5-XX 4.5 + 0.25 5.0 + 0.25 S407-0005-XX 5.5 + 0.30 S407-05.5-XX 6.0 + 0.30 S407-0006-XX 6.5 + 0.30 S407-06.5-XX 7.0 + 0.30 S407-0007-XX 7.5 + 0.30 S407-07.5-XX 8.0 + 0.30 S407-0008-XX 8.5 + 0.30 S407-08.5-XX 9.0 + 0.30 S407-0009-XX 9.5 + 0.30 S407-09.5-XX S407-0010-XX 10.0 + 0.30 * Shorting Device ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Rise Time DCR Rise Time XX = Zo Total Delay ( True) ( True) Maximum 1.5 ns 2.9 ns 0.20 Ohms S407-10.5-XX 10.5 + 0.35 ns 1.6 ns 3.0 ns 0.20 Ohms S407-0011-XX 11.0 + 0.35 ns 3.1 ns 0.20 Ohms S407-11.5-XX 11.5 + 0.35 ns 1.6 ns 1.6 ns 3.2 ns 0.25 Ohms S407-0012-XX 12.0 + 0.35 ns 1.6 ns 3.3 ns 0.25 Ohms S407-12.5-XX 12.5 + 0.35 ns 1.7 ns 3.4 ns 0.37 Ohms S407-0013-XX 13.0 + 0.35 ns 1.7 ns 3.5 ns 0.37 Ohms S407-13.5-XX 13.5 + 0.35 ns 1.7 ns 3.6 ns 0.50 Ohms S407-0014-XX 14.0 + 0.35 ns 1.7 ns 3.7 ns 0.50 Ohms S407-14.5-XX 14.5 + 0.40 ns 1.8 ns 3.8 ns 0.62 Ohms S407-0015-XX 15.0 + 0.40 ns 1.8 ns 3.9 ns 0.62 Ohms S407-15.5-XX 15.5 + 0.40 ns 1.9 ns 4.0 ns 0.75 Ohms S407-0016-XX 16.0 + 0.40 ns 2.0 ns 4.1 ns 0.75 Ohms S407-16.5-XX 16.5 + 0.45 ns 2.1 ns 4.2 ns 0.80 Ohms S407-0017-XX 17.0 + 0.45 ns 2.2 ns 4.3 ns 0.80 Ohms S407-17.5-XX 17.5 + 0.45 ns 2.3 ns 4.5 ns 0.85 Ohms S407-0018-XX 18.0 + 0.45 ns 2.4 ns 4.7 ns 0.85 Ohms S407-18.5-XX 18.5 + 0.50 ns 2.5 ns 4.8 ns 0.90 Ohms S407-0019-XX 19.0 + 0.50 ns 2.6 ns 5.0 ns 0.90 Ohms S407-19.5-XX 19.5 + 0.50 ns 2.7 ns 5.1 ns 0.95 Ohms S407-0020-XX 20.0 + 0.50 ns 2.8 ns 5.2 ns 0.95 Ohms S407-20.5-XX 20.5 + 0.50 ns Impedance in Ohms + 10%, XX = 55; 55 Ohms, XX = 93; 93 Ohms Test Conditions @ 25oC Electrical Characteristics Delay Measurement Rise Time Measurement Distortion Insulation Resistance @ 50 Vdc Dielectric Withstanding Voltage Operating Temperature Range Temperature Coefficient of Delay Minimum Input Pulse Width Maximum Duty Cycle DCR Maximum 1.00 Ohm 1.00 Ohm 1.05 Ohms 1.05 Ohms 1.15 Ohms 1.15 Ohms 1.45 Ohms 1.45 Ohms 1.60 Ohms 1.60 Ohms 1.75 Ohms 1.75 Ohms 1.80 Ohms 1.80 Ohms 1.85 Ohms 1.85 Ohms 1.90 Ohms 1.90 Ohms 1.95 Ohms 1.95 Ohms 2.00 Ohms 50% Levels 20%-80% Levels + 10% 10K Megohms Min. 50 Vdc -55 oC to +125o C 100 PPM/oC Max. 3 x Trout or 5 ns W.I.G. 60% Other Delays and Impedances Available Consult Sales Ein Trin PW PP Pulse Voltage Rise Time Pulse Width Pulse Period 1 Volt Typical 1.0 ns (10%-90%) 3 x Total Delay 4 x Pulse Width Notes Transfer molded for better reliability Compatible with ECL & TTL circuits Terminals: Electro-Tin plate phosphor bronze Performance warranty is limited to specified parameters listed Tape & Reel available 24mm Wide x 12mm Pitch, 750 pieces per 13" reel Specifications subject to change without notice. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com 34 Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366