Data Sheet 400mW 1060nm / 1070nm High Power Laser Diode Module LC96A10x0-20R The Bookham LC96A10x0-20R high power single-mode laser module has been designed as light source for fiber laser applications. Processes and techniques of coupling the fiber to the laser allow high output powers that are very stable with both time and temperature. Devices are available with kink free output powers to 400mW. Features: • High output power, up to 400mW kink free • 1060nm or 1070nm wavelength • Polarization maintaining single-mode fiber pigtail • Internal thermoelectric heatpump and monitor photodiode • Hermetically sealed 14-pin butterfly package • RoHS compliant Applications: • Fiber lasers • Pumping and printing applications 1 Data Sheet Characteristics Conditions unless otherwise stated: Case temperature -20 to +75°C Submount temperature 25°C Monitor diode bias -5 V CW operation Parameter Min Typ Max Unit Threshold Current (Ith) 10 40 70 mA Operating Power at 750mA 350 400 Forward Voltage (Vf) Peak Wavelength (λf ) LC96A1060-20R LC96A1070-20R Monitor Detector Responsivity mW 2 2.5 V 1055 1065 1060 1070 1065 1078 nm 0.3 1.0 µA/mW Monitor Dark Current 10 nA 10.5 kΩ Heatpump Current (∆T = 50°C, If = If max) 1.5 A Heatpump Voltage (∆T = 50°C, If = If max) 3.0 V Thermistor Resistance (at 25°C) 9.5 10 Absolute Ratings Parameter Min Max Unit Storage Temperature -40 85 °C 1000 mA 2 V Heatpump Current 2.2 A Lead Soldering Temperature (10s max) 260 °C Laser Forward Current (10s max) Laser Reverse Voltage Fiber Bend Radius 2 30 mm Data Sheet Connections 3 Pin # Description Pin # Description 1 Peltier cooler (+) 8 Not connected 2 Thermistor 9 Not connected 3 Monitor anode (-) 10 Laser anode (+) 4 Monitor cathode (+) 11 Laser cathode (-) 5 Thermistor 12 Not connected 6 Not connected 13 Case ground 7 Not connected 14 Peltier cooler (-) Data Sheet RoHS Compliance Bookham is fully committed to environment protection and sustainable development and has set in place a comprehensive program for removing polluting and hazardous substances from all of its products. The relevant evidence of RoHS compliance is held as part of our controlled documentation for each of our compliant products. RoHS compliance parts are available to order, please refer to the ordering information section for further details. Ordering Information: LC96A1060-20R LC96A1070-20R 400mW 1060nm High Power Laser Diode Module 400mW 1070nm High Power Laser Diode Module Contact Information Bookham (Switzerland) AG EMEA Sales Contact ASIA Sales Contact Gunnar Stolze Patrick Lee Binzstrasse 17 8045 Zurich Switzerland • Tel: +41 79 635 3777 • Tel: +852 9197 7014 North America Sales Contact Japan Sales Contact Michael Cutler • Tel: +813 5285 0861 • Tel: +41 44 455 8787 • Fax:+41 44 455 8586 www.bookham.com [email protected] • Tel: +1 678 763 0777 Japan Laser Corporation Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Bookham before they become applicable to any particular order or contract. In accordance with the Bookham policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of Bookham or others. Further details are available from any Bookham sales representative. ISO 9001:2000 Certified 4 INVISIBLE LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION CLASS 4 LASER PRODUCT Maximum power >500mW Wavelength >970nm REFERENCE IEC 60825-1 Edition 1.2 WAVELENGTH 1060-1070nm FM 68159 This product complies with 21CFR 1040.10 BH12921 Rev 4.0 September 2007. ©Bookham 2005. Bookham is a registered trademark of Bookham Inc.