PRELIMINARY Data Sheet ULTRA High Power 980nm Pump Laser Module - Grating Stabilized, 750mW LC96U* These lasers are designed as pump sources for erbium doped fiber amplifier (EDFA) applications. Processes and techniques of coupling the fiber to the laser allow high output powers that are very stable with both time and temperature. The grating is located in the pigtail to stabilize the wavelength. Devices are available with kink free output powers to 750mW. The LC96 ‘U’ series pump module utilises a double Fiber Bragg Grating design for enhanced wavelength and power stability performance. This product has been designed to ensure superior wavelength locking over drive current, temperature and optical feedback changes. Features: • Double Fiber Bragg Grating wavelength stabilization • Ultra High output power, up to 750mW kink free • Polarization maintaining fiber pigtail • Internal thermoelectric heatpump and monitor photodiode • Hermetically sealed 14 pin butterfly package • Telcordia GR-468-CORE compliant • Field proven high reliability • RoHS compliant Applications: • Low noise erbium doped fiber amplifiers (EDFAs) • Dense wavelength division multiplexing (DWDM) EDFAs • CATV Applications 1 PRELIMINARY Data Sheet Characteristics Conditions unless otherwise stated: Case temperature -20 to +75°C Submount temperature 20°C Monitor diode bias -5V CW operation Kink-free fiber-coupled output power: (wavelength = 974nm) LC96UA74-20R 625mW LC96UB74-20R 650mW LC96UC74-20R 675mW LC96UD74-20R 700mW LC96UE74-20R 725mW LC96UF74-20R 750mW Parameter Min Typ Max Unit 40 55 mA 1080 mA 2.2 2.6 V 974 975 nm Spectrum stability (t = 60 secs) ±0.2 nm Temperature dependence of peak wavelength 0.02 nm/°C 10 µA/mW 50 nA 12.8 kΩ Power Stability Peak-to-peak, T = 60s, DC to 50kHz sampling, Tc = 25°C >30mW 20 – 30mW 10 – 20mW 0.15 0.25 0.5 dB dB dB Heatpump current (∆T = 55°C, If = If max) 2.2 A Heatpump voltage (∆T = 55°C, If = If max) 3.3 V Threshold current (Ith) Operating drive current (If ) Forward voltage Centre wavelength (λc) Monitor detector responsivity 973 1.0 Monitor dark current Thermistor resistance (at 20°C) 2 11.8 12.3 PRELIMINARY Data Sheet Absolute Maximum Ratings Parameter Min Max Unit Operating temperature -20 75 °C Storage temperature -40 85 °C Laser forward current 1500 mA Laser reverse voltage 2 V Heatpump current 2.4 A Lead soldering temperature (10s max) 350 °C Fibre bend radius 30 Package Outline Drawing and Dimensions Figure 1: Package Outline Drawing and Dimensions (mm) Fiber Specification Nufern PM980-HP or equivalent 250µm primary coated. 3 mm PRELIMINARY Data Sheet Connections Pin # Description Pin # Description 1 Peltier cooler (+) 8 Not connected 2 Thermistor 9 Not connected 3 Monitor anode (-) 10 Laser anode (+) 4 Monitor cathode (+) 11 Laser cathode (-) 5 Thermistor 12 Not connected 6 Not connected 13 Case ground 7 Not connected 14 Peltier cooler (-) Figure 2: Connections 4 7 6 5 4 3 2 1 8 9 10 11 12 13 14 PRELIMINARY Data Sheet RoHS Compliance Bookham is fully committed to environment protection and sustainable development and has set in place a comprehensive program for removing polluting and hazardous substances from all of its products. The relevant evidence of RoHS compliance is held as part of our controlled documentation for each of our compliant products. RoHS compliance parts are available to order, please refer to the ordering information section for further details. Ordering Information: LC96UA74-20R 625mW LC96UB74-20R 650mW LC96UC74-20R 675mW LC96UD74-20R 700mW LC96UE74-20R 725mW LC96UF74-20R 750mW Contact Information North America Bookham Worldwide Headquarters Europe Paignton Office Asia Shenzhen Office 2584 Junction Ave. San Jose CA 95134 USA Brixham Road Paignton Devon TQ4 7BE United Kingdom 2 Phoenix Road Futian Free Trade Zone Shenzhen 518038 China • Tel: +1 408 919 1500 • Tel: +44 (0) 1803 66 2000 • Fax: +1 408 919 6083 • Fax: +44 (0) 1803 66 2801 • Fax: +86 755 33305805 +86 755 33305807 • Tel: +86 755 33305888 Important Notice Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by Bookham before they become applicable to any particular order or contract. In accordance with the Bookham policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of Bookham or others. Further details are available from any Bookham sales representative. www.bookham.com [email protected] 5 INVISIBLE LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION CLASS 4 LASER PRODUCT Maximum Power >500mW Wavelength >970nm REFERENCE IEC 60825-1 Edition 1.2 LASER RADIATION - AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION MAX POWER > 500mW WAVELENGTH > 970nm CLASS IV LASER PRODUCT THIS PRODUCT COMPLIES WITH 21CFR 1040.10 ISO14001:1996 EMS 504193 TL9000 Rev 3.0 (ISO9001:2000) FM15040 Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. BH13429 Rev 1.0 March 2007. ©Bookham 2006. Bookham is a registered trademark of Bookham Inc.