EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-11/T2C-EU2W1M/2T Features ․Fluorescence Type ․High Luminous Intensity ․High Efficiency ․Emission Color:x=0.29,y=0.30 ․ESD protection. ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence. The mixture of blue light and yellow light results in a white emission. Applications ․OA Equipment ․Backlighting of Full Color LCD ․Replacement of Conventional Light Bulbs and Fluorescent Lamps Device Selection Guide Chip Lens Color Material Emitted Color InGaN Blue Everlight Electronics Co., Ltd. Device No.: Water Clear http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 1 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 2 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Units Condition Luminous Intensity IV 565 ------ 1420 mcd IF=20mA Viewing Angle 2θ1/2 -- 120 -- deg IF=20mA Forward Voltage VF 2.70 ----- 3.50 V IF=20mA Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 3 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T Bin Range Of Luminous Intensity Bin Code Min. Max. U2 565 715 V1 715 900 V2 900 1120 W1 1120 1420 W2 1420 1800 Unit Condition mcd IF=20mA Unit Condition V IF=20mA Bin Range Of Forward Voltage Group M Bin Code Min. Max. 5 2.75 3.05 6 3.05 3.35 7 3.35 3.65 8 3.65 3.95 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 4 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T Chromaticity Coordinates Specifications for Bin Grading (IF=20mA) Group Bin Code A0 E B3 B5 CIE_x CIE_y 0.280 0.248 0.264 0.267 0.283 0.305 0.296 Bin Code CIE_x CIE_y 0.311 0.294 0.307 0.315 0.330 0.339 0.276 0.330 0.318 0.287 0.295 0.307 0.315 0.283 0.305 0.304 0.33 0.304 0.330 0.33 0.36 0.307 0.315 0.33 0.339 0.296 0.276 0.287 0.295 0.307 0.315 0.311 0.294 B6 B4 *The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 5 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T CIE Chromaticity Diagram 0.36 0.35 0.34 B4 0.33 0.32 B3 y 0.31 0.30 B6 B5 0.29 0.28 0.27 A0 0.26 0.25 0.24 0.26 0.28 0.30 0.32 0.34 x *The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 6 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 7 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 8 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared Date:7-Feb-2007 Desiccant Rev. 1 Label Page: 9 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Ac/Re Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 min 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 2 Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 10 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No.: http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 11 of 12 Prepared by: Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T2C-EU2W1M/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No.: Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared Date:7-Feb-2007 Rev. 1 Page: 12 of 12 Prepared by: Teresa Lee