EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-11/T1C-KV2W1M/2T Features ․Fluorescence Type ․High Luminous Intensity ․High Efficiency ․Emission Color:x=0.29,y=0.30 ․ESD protection. ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence. The mixture of blue light and yellow light results in a white emission. Applications ․OA Equipment ․Backlighting of Full Color LCD ․Automotive Equipment ․Replacement of Conventional Light Bulbs and Fluorescent Lamps Device Selection Guide Chip Lens Color Material Emitted Color InGaN Pure White Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Rev. 1 Page: 1 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Rev. 1 Page: 2 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Units Condition Luminous Intensity IV 900 ------ 1420 mcd IF=20mA Viewing Angle 2θ1/2 -- 120 -- deg IF=20mA Forward Voltage VF 2.75 ----- 3.95 V IF=20mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Rev. 1 Page: 3 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Bin Range Of Luminous Intensity Bin Code Min. Max. 900 1120 V2 W1 1120 1420 Unit Condition mcd IF=20mA Unit Condition V IF=20mA Bin Range Of Forward Voltage Group Bin Code Min. Max. 5 2.75 3.05 6 3.05 3.35 M 7 3.35 3.65 8 3.65 3.95 Notes: 1. Tolerance of Luminous Intensity ±10% 2. Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Rev. 1 Page: 4 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Group Bin Code B5-1 K CIE_x CIE_y 0.2915 0.287 Bin Code CIE_x CIE_y 0.2855 0.3003 0.295 0.295 0.297 0.305 0.307 0.315 B5-2 0.297 0.305 0.3003 0.295 0.309 0.3045 0.296 0.276 0.3035 0.285 0.2915 0.2855 0.3003 0.295 B5-3 B5-4 0.3003 0.295 0.309 0.3045 0.3035 0.285 0.311 0.294 *The C.I.E. 1931 chromaticity diagram (Tolerance ±0.01). 0.320 0.315 0.310 0.305 B5-2 0.300 B5-1 0.295 y B5-4 0.290 B5-3 0.285 0.280 0.275 0.270 0.285 0.290 0.295 0.300 0.305 0.310 0.315 x Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Rev. 1 Page: 5 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Rev. 1 Page: 6 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1 mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Rev. 1 Page: 7 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Desiccant Rev. 1 Label Page: 8 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Thermal Shock High Temperature Storage Low Temperature Storage Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Test Sample Ac/Re Hours/Cycles Size 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 6 Min. 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Rev. 1 Page: 9 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Rev. 1 Page: 10 of 11 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 67-11/T1C-KV2W1M/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No.: DSE-671-415 Date: 21-Sep-2006 Rev. 1 Page: 11 of 11 Prepared by: Josh Chou