EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs (Preliminary) 67-21B SUBC/S400-XX/TR8 Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-21 series is available in soft orange, green, blue and yellow. Due to the package design, the optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Material Emitted Color InGaN Super Blue Everlight Electronics Co., Ltd. Device No. : Lens Color Water Clear http://www.everlight.com prepared date::17-May-06 Rev. 2 Page: 1 of 9 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-21B SUBC/S400-XX/TR8 Package Dimensions CL 2.2±0.1 2.8±0.2 CL - + 3.25±0.2 Polarity 3.0 For reflow soldering (propose) Notes: .All dimensions are in millimeters ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date::17-May-06 Rev. 2 Page: 2 of 9 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-21B SUBC/S400-XX/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Electrostatic Discharge (HBM) ESD 150 V Power Dissipation Pd 110 mW IFP 100 mA Peak Forward Current(Duty 1/10 @ 1KHz) Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Iv Luminous Intensity Rank Min. Typ. Max. Unit Condition A6 225 358 ----- mcd IF=20mA X9 650 800 ----- mcd IF=20mA X0 780 960 ----- mcd IF=20mA Viewing Angle 2θ1/2 ----- ----- 60 ----- deg IF=20mA Peak Wavelength λp ----- ----- 468 ----- nm IF=20mA Dominant Wavelength λd ----- ----- 470 ----- nm IF=20mA Spectrum Radiation Bandwidth Δλ ----- ----- 35 ----- nm IF=20mA Forward Voltage VF ----- ----- 3.5 4.3 V IF=20mA Reverse Current IR ----- ----- ----- 50 μA VR=5V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date::17-May-06 Rev. 2 Page: 3 of 9 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-21B SUBC/S400-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date::17-May-06 Rev. 2 Page: 4 of 9 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-21B SUBC/S400-XX/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date::17-May-06 Rev. 2 Page: 5 of 9 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-21B SUBC/S400-XX/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. + Polarity Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date::17-May-06 Desiccant Rev. 2 Label Page: 6 of 9 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-21B SUBC/S400-XX/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date::17-May-06 Rev. 2 Page: 7 of 9 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-21B SUBC/S400-XX/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date::17-May-06 Rev. 2 Page: 8 of 9 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-21B SUBC/S400-XX/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com prepared date::17-May-06 Rev. 2 Page: 9 of 9 Prepared by: Rita Shen