EVERLIGHT ELSD-405SYGWA/S530-E2

Technical Data Sheet
0.39" Single Digit SMD Displays
ELSD-405SYGWA/S530-E2
Features
˙Packaged in tape and reel for SMT manufacturing.
˙Design flexibility(common cathode or anode).
˙Categorized for luminous intensity.
˙The thickness is thinness than tradition display.
˙Pb free
˙The product itself will remain with RoHS compliant
version.
Descriptions
˙The SMD type is much smaller than tradition
type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.
Applications
˙Suitable for indoor use.
˙Audio system.
˙Set top box.
˙Game machine.
˙Channel indicator of TV.
Device Selection Guide
Chip
Face Color
Material
Emitted Color
AlGaInP
Brilliant Yellow Green
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No.: CDGD-405-005
Prepared date:2007/5/4
Gray
Rev.:3
Page: 1 of 8
Prepared by: Li Jingjing
ELSD-405SYGWA/S530-E2
Package Dimensions
Land Pattern(Recommend)
Notes:
˙All dimensions are in millimeters, tolerance is 0.25mm unless otherwise noted.
˙Above specification may be changed without notice. Supplier will reserve
authority on material change for above specification.
Absolute Maximum Ratings (Ta=25℃)
Parameter
Forward Current
Pulse Forward Current*1
Symbol
IF
IFP
Rating
25
60
Operating Temperature
Topr
-40 ~ +85
Units
mA
mA
℃
Storage Temperature
Tstg
-40 ~ +85
℃
Tref
260
℃
ESD
Pd
VR
2000
60
5
V
mW
V
Reflow Temperature
*2
Electrostatic Discharge
Power Dissipation
Reverse Voltage
Notes: *1:IFP Conditions--Pulse Width≦10msec and Duty≦1/10.
*2:Reflow time≦5 seconds.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No.: CDGD-405-005
Prepared date:2007/5/4
Rev.:3
Page: 2 of 8
Prepared by: Li Jingjing
ELSD-405SYGWA/S530-E2
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Units
Condition
Forward Voltage
VF
--
2.0
2.4
V
IF=20mA
Reverse Current
IR
--
--
10
μA
VR=5V
5.6
9.4
-mcd
IF=10mA
Luminous Per segment
Intensity Per decimal
point
IV
2.0
3.9
--
Peak Wavelenght
λp
--
575
--
nm
IF=20mA
Dominant Wavelenght
λd
--
573
--
nm
IF=20mA
Spectrum Radiation
Bandwidth
△λ
--
20
--
nm
IF=20mA
Chromaticity Coordinates Specifications for Bin Grading (Unit: mcd)
Rank
Min.
Max.
Rank
Min.
Max.
P
5.6
8.9
S
15.0
24.0
Q
7.8
12.5
T
21.0
34.0
R
11.0
17.6
--
--
--
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No.: CDGD-405-005
Prepared date:2007/5/4
Rev.:3
Page: 3 of 8
Prepared by: Li Jingjing
ELSD-405SYGWA/S530-E2
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No.: CDGD-405-005
Prepared date:2007/5/4
Rev.:3
Page: 4 of 8
Prepared by: Li Jingjing
ELSD-405SYGWA/S530-E2
■ Reflow Temp. / Time :
■ Soldering Iron :
Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃
→ -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should
be controllable. Surface temperature of the device should be under 230 ℃.
■ Rework :
1. Customer must finish rework within 5 sec under 260℃.
2. The head of iron can not touch copper foil.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No.: CDGD-405-005
Prepared date:2007/5/4
Rev.:3
Page: 5 of 8
Prepared by: Li Jingjing
ELSD-405SYGWA/S530-E2
■ Reliability test items and conditions:
The reliability of products shall be satisfied with items listed below.
Confidence level:97%
LTPD:3%
Failure
Judgment
Criteria
NO
Item
Test
Conditions
Test
Hours/Cycle
Sample
Size
1
Reflow Heat
TEMP:260°C±5°C
10 SEC
76 PCS
0/1
Temperature
Cycle
H:+100°C 15min
∫ 5min
L:-40°C 15min
300 CYCLES
76 PCS
0/1
Thermal
Shock
H:+100°C 5min
∫ 10 sec
L:-10°C 5min
300 CYCLES
76 PCS
0/1
2
3
Iv≦Ivt*0.5
or
Vf≧U
or
Vf≦L
Ac/Re
4
High
Temperature
Storage
TEMP:100°C
1000 HRS
76PCS
5
Low
Temperature
Storage
TEMP:-40°C
1000 HRS
76 PCS
0/1
DC Operating
Life
TEMP:25°C
If=10mA
1000 HRS
76 PCS
0/1
6
High
85°C / 85% RH
7 Temperature /
1000 HRS
76 PCS
High
Humidity
Note:Ivt:The test Iv value of the chip before the reliablility test
Iv:The test value of the chip that has completed the reliablility test
U:Upper Specification Limit
L: Lower Specification Limit
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No.: CDGD-405-005
Prepared date:2007/5/4
Rev.:3
0/1
0/1
Page: 6 of 8
Prepared by: Li Jingjing
ELSD-405SYGWA/S530-E2
Package Dimensions
2.30
32.50
A"
330
03 03
03 03
8 9 10
12
0°
03
03
2 3 4
5 6 7
11 12 1
B"
110
90
2
R20
100
1
2
3
6
P S
4
5
6
7
8
2.3
10.75
5
.7
R6
R1
Taping Dimensions
I(4.0±0.1)
H(2.0 +0.25
)
-0
15.9
C(20±0.1)
G(1.5 +0.1
-0 )
A0(17.5±0.1)
K(20±0.1)
E(14.2±0.1)
A(32±0.3)
F(1.75±0.1)
L(2.0±0.1)
D(4.15±0.1)
M
0.2±0.05
R0.3
J(0.35±0.05)
B(15.4±0.1)
R0.75
M部詳圖
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No.: CDGD-405-005
Prepared date:2007/5/4
Rev.:3
Page: 7 of 8
Prepared by: Li Jingjing
ELSD-405SYGWA/S530-E2
Packing Quantity Specification
800PCS/Roll,6Rolls/Box
Label Form Specification
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks
HUE: Peak Wavelength
REF: Reference
LOT No: Lot Number
DC: Year and weekly
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any
damage resulting from use of the product which does not comply with the absolute maximum
ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without
EVERLIGHT’sconsent.
EVERLIGHT ELECTRONICS CO., LTD.
Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Device No.: CDGD-405-005
Prepared date:2007/5/4
Rev.:3
Page: 8 of 8
Prepared by: Li Jingjing