Technical Data Sheet 0.56" Dual Digit SMD Displays ELSD-512SYGWA/S530-E2 Features ˙Packaged in tape and reel for SMT manufacturing. ˙Design flexibility(common cathode or anode). ˙Categorized for luminous intensity. ˙The thickness is thinness than tradition display. ˙Pb free ˙The product itself will remain with RoHS compliant version. Descriptions ˙The SMD type is much smaller than tradition type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Applications ˙Suitable for indoor use. ˙Audio system. ˙Set top box. ˙Game machine. ˙Channel indicator of TV. Device Selection Guide Chip Face Color Material Emitted Color AlGaInP Brilliant Yellow Green Everlight Electronics Co., Ltd. Device No.: CDGD-512-004 http://www.everlight.com Prepared date:2007/5/7 Gray Rev. 2 Page: 1 of 6 Prepared by: Li Jing jing ELSD-512SYGWA/S530-E2 Package Dimensions Land Pattern(Recommend) Notes: ˙All dimensions are in millimeters, tolerance is 0.25mm unless otherwise noted. ˙Above specification may be changed without notice. Supplier will reserve authority on material change for above specification. Absolute Maximum Ratings (Ta=25℃) Parameter Forward Current Pulse Forward Current*1 Symbol IF IFP Rating 25 60 Operating Temperature Topr -40 ~ +85 Units mA mA ℃ Storage Temperature Tstg -40 ~ +85 ℃ Reflow Temperature Tref 260 ℃ Electrostatic Discharge Power Dissipation Reverse Voltage ESD Pd VR 2000 60 5 V mW V Notes: *1:IFP Conditions--Pulse Width≦10msec and Duty≦1/10. *2:Reflow time≦5 seconds. Everlight Electronics Co., Ltd. Device No.: CDGD-512-004 http://www.everlight.com Prepared date:2007/5/7 Rev. 2 Page: 2 of 6 Prepared by: Li Jing jing ELSD-512SYGWA/S530-E2 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Units Condition Forward Voltage VF -- 2.0 2.4 V IF=20mA Reverse Current IR -- -- 10 μA VR=5V 4.0 9.6 -mcd IF=10mA Luminous Per segment Intensity Per decimal point IV 2.0 3.9 -- Peak Wavelenght λp -- 575 -- nm IF=20mA Dominant Wavelenght λd -- 573 -- nm IF=20mA Spectrum Radiation Bandwidth △λ -- 20 -- nm IF=20mA Chromaticity Coordinates Specifications for Bin Grading (Unit: mcd) Rank Min. Max. Rank Min. Max. N 4.0 6.4 T 21.0 34.0 P 5.6 8.9 U 30.0 48.0 Q 7.8 12.5 V 42.0 67.0 R 11.0 17.6 W 59.0 94.0 S 15.0 24.0 --- --- --- Everlight Electronics Co., Ltd. Device No.: CDGD-512-004 http://www.everlight.com Prepared date:2007/5/7 Rev. 2 Page: 3 of 6 Prepared by: Li Jing jing ELSD-512SYGWA/S530-E2 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No.: CDGD-512-004 http://www.everlight.com Prepared date:2007/5/7 Rev. 2 Page: 4 of 6 Prepared by: Li Jing jing ELSD-512SYGWA/S530-E2 ■ Reflow Temp. / Time : ■ Soldering Iron : Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃ → -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should be controllable. Surface temperature of the device should be under 230 ℃. ■ Rework : 1. Customer must finish rework within 5 sec under 260℃. 2. The head of iron can not touch copper foil. Everlight Electronics Co., Ltd. Device No.: CDGD-512-004 http://www.everlight.com Prepared date:2007/5/7 Rev. 2 Page: 5 of 6 Prepared by: Li Jing jing ELSD-512SYGWA/S530-E2 ■ Reliability test items and conditions: The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Failure Judgment Criteria NO Item Test Conditions Test Hours/Cycle Sample Size 1 Reflow Soldering TEMP:260°C±5°C Min. 5 SEC 6 Min 22 PCS 0/1 Temperature Cycle H：+100°C 15min ∫ 5min L：-40°C 15min 300 CYCLES 22 PCS 0/1 Thermal Shock H：+100°C 5min ∫ 10 sec L：-10°C 5min 300 CYCLES 22 PCS 0/1 2 3 Ac/Re Iv≦Ivt*0.5 or VF≧U or VF≦L 4 High Temperature Storage TEMP:100°C 1000 HRS 22PCS 5 Low Temperature Storage TEMP:-40°C 1000 HRS 22 PCS DC Operating Life TEMP:25°C If＝10mA 1000 HRS 22 PCS 0/1 85°C / 85% RH 1000 HRS 22 PCS 0/1 6 7 High Temperature / High Humidity Note：Ivt：The test Iv value of the chip before the reliablility test Iv：The test value of the chip that has completed the reliablility test U：Upper Specification Limit L： Lower Specification Limit Everlight Electronics Co., Ltd. Device No.: CDGD-512-004 http://www.everlight.com Prepared date:2007/5/7 Rev. 2 Page: 6 of 6 Prepared by: Li Jing jing 0/1 0/1