I-7017 8-channel Analog Input Module Model:I-7017 Analog Input Input Channels Input Type Resolution Sampling Rate Accuracy BandWidth Zero drift Span drift Input Impedance Common Mode Rejection Normal Mode Rejection Over voltage Protection Photo-Isolation Intra-module Isolation, Field to Logic 8 differential or 6 differential and 2 single- ended by jumper select +/-150mV, +/-500mV , +/-1V, +/-5V, +/-10V +/-20mA (requires optional external 125 ohm resistor) 16-bit 10 Samples/ Second +/-0.1% 15.7 Hz +/-20uV/˘XC +/-25ppm/˘XC 20M Ohms 86dB min 100dB +/-35V(P-P) 3750 Vrms 3000 VDC Interface Interface Format Buad Rate RS-485 N, 8, 1 1200 ~ 115200bps LED Display 1 LED as Power/ Communication indicator Power Input Power Consumption +10 to +30VDC 1.3W Environment Operating temperature Storage temperature Humidity I-7017 I-7017 CR -25 to 75˘XC -40 to 85˘XC 5 to 95%, non-condensing 8-channel Analog Input Module 8-channel Analog Input Module (RoHS) I-7017 Hardware Internal I/O Structure PIN Assignment Wire Connection Analog Input Channel 0 to 5 Wire Connection Note: When connecting to a current source, an optional external 125-Ohn resistor is required. Analog Input Channe 6 and 7 Digital 8 differnet mode INIT* mode Note: To access the jumpers, the cover must be opened.