VWO 140 Three Phase AC Controller Modules IRMS = 3x 143 A VRRM = 800-1600 V Preliminary data VRSM VDSM VRRM VDRM V V 800 1200 1400 1600 800 1200 1400 1600 C1 Type VWO 140-08io1 VWO 140-12io1 VWO 140-14io1 VWO 140-16io1 E1 C10 E10 Symbol Test Conditions IRMS IRMS ITAVM TC = 85°C, 50 - 400 Hz (per phase) TC = 85°C, 50 - 400 Hz (per phase) for 10 sec. TC = 85°C; (180° sine) ITSM TVJ = 45°C; VR = 0 I2t (di/dt)cr K1 M1 S1 K10 M10 V1 S10 V10 Maximum Ratings 101 143 46 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1150 1240 A A TVJ = 125°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1040 1120 A A TVJ = 45°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 6610 6460 A2s A2s TVJ = 125°C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 5410 5270 A2s A2s ● TVJ=125°C repetitive, IT = 45 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/ms 150 A/ms ● ● ● ● ● (dv/dt)cr TVJ=125°C; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) PGM TVJ=125°C IT = ITAVM tp = 30 ms tp = 300 ms A/ms 1000 V/ms VRGM 10 V -40...+125 150 -40...+125 °C °C °C 3000 3600 V~ V~ 2-2.5 18-22 Nm. lb.in. VISOL 50/60 Hz, RMS IISOL £ 1 mA t = 1 min t=1s Md Mounting torque (M5) Weight typ. 80 Switching and control of three phase AC circuits Softstart AC motor controller Solid state switches Light and temperature control Advantages ● PGAVM Thyristor controller for AC (circuit W3C acc. to IEC) for mains frequency Package with DCB base plate Isolation voltage 3600 V~ Planar passivated chips UL applied Applications ● 500 W W W for 10 sec. ● ● 10 5 0.5 TVJ TVJM Tstg Features ● ● ● Easy to mount with two screws Space and weight savings Improved temperature and power cycling High power density g Data according to IEC 60747 refer to a single thyristor unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. © 2000 IXYS All rights reserved 1-2 VWO 140 Symbol Test Conditions ID, IR TVJ = 125°C; VR = VRRM; VD = VDRM £ 5 VT IT £ 1.5 V VT0 rT For power-loss calculations only 0.85 5.2 V mW VGT VD = 6 V; IGT VD = 6 V; £ £ £ £ 1.5 1.6 100 200 V V mA mA VGD IGD TVJ=125°C; £ £ 0.2 5 V mA IL TVJ = 25°C; tP = 10 ms IG = 0.45 A; diG/dt = 0.45 A/ms £ 450 mA IH TVJ = 25°C; VD = 6 V; RGK = ¥ £ 200 mA tgd TVJ = 25°C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/ms £ 2 ms tq TVJ=125°C; IT = 20 A, tP = 200 ms; di/dt = -10 A/ms typ. VR = 100 V; dv/dt = 15 V/ms; VD = 2/3 VDRM 150 ms RthJC per per per per RthJK dS dA a Characteristic Values = 140 A; TVJ = 25°C TVJ = TVJ = TVJ = TVJ = 25°C -40°C 25°C -40°C VD = 2/3 VDRM mA thyristor; sine 180°el module thyristor; sine 180°el module 0.6 0.1 0.7 0.117 K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Max. allowable acceleration 12.7 9.4 50 mm mm m/s2 Dimensions in mm (1 mm = 0.0394") © 2000 IXYS All rights reserved 2-2