VCO180 Advanced Technical Information ITRMS = 280A ITAVM = 180A VRRM = 800-1800 V Thyristor Modules ECO-PAC 2 ACE-1 VRSM VRRM VDSM V VDRM V Typ 900 1300 1500 1700 1900 800 1200 1400 1600 1800 VCO VCO VCO VCO VCO Symbol E-3 180 180 180 180 180 - 08io7 12io7 14io7 16io7 18io7 Conditions K-12 SVX-18 O VC Maximum Ratings ITRMS 280 A 180 A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 4500 4900 A A TVJ = 125°C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 3800 4200 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 101000 99500 A2s A2s TVJ = 125°C; VR = 0 V; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 72000 73000 A2s A2s 150 A/µs 500 A/µs 1000 V/µs ≤ 10 ≤ 5 W W PGAVM 0.5 W VRGM 10 V -40 ... + 130 150 -40 ... + 125 °C °C °C 3000 3600 V~ V~ 1.5 - 2.0 14 - 18 Nm lb.in. 24 g ITAVM TC = 90°C; TVJ = 130°C; 180° sine ITSM TVJ = 45°C; VR = 0 V; I2dt (di/dt)cr TVJ = 45°C; VR = 0 V; TVJ = 125°C; repetitive, IT = 250 A f = 50 Hz; tP = 200 µs; VD = 2/3VDRM; IG = 0.5 A non repetitive, IT = ITAVM diG/dt = 0.5 A/µs; (dv/dt)cr TVJ = 125°C; VDR = 2/3VDRM RGK = ∞, method 1 (linear voltage rise) PGM TVJ = 125°C; IT = ITAVM; TVJ TVJM Tstg tP = 30 ms tP = 300 ms for10 sec VISOL 50/60 Hz, RMS IISOL < 1 mA t = 1 min t=1s Md Mounting torque (M4) Weight typ. 180 Features • Isolation voltage 3600 V~ • Planar glass passivated chips • Low forward voltage drop • Leads suitable for PC board soldering Applications • DC motor control • Light and temperature control • Softstart AC motor controller • Solid state switches Advantages • Easy to mount with two screws • Space and weight savings • Improved temperature and power cycling • High power density • Small and light weight IXYS reserves the right to change limits, test conditions and dimensions. © 2003 IXYS All rights reserved 312 Data according to IEC 60747 refer to a single thyristor unless otherwise stated 1-2 Advanced Technical Information VCO180 Component Symbol Conditions Characteristic Values min. typ. max. ID, IR TVJ = 125°C; VR = VRRM; VD = VDRM 10 mA VT IT = 200 A; TVJ = 25°C 1.1 V VTO rT For power-loss calculations only VGT VD = 6 V; TVJ = 25°C TVJ = -40°C 1.5 1.6 V V IGT VD = 6 V; TVJ = 25°C TVJ = -40°C 300 400 mA mA VGD IGD TVJ = 125°C; TVJ = 125°C; VD = 2/3VDRM VD = 2/3VDRM 0.2 10 V mA IL TVJ = 25°C; tP = 10 µs IG = 0.5 A; diG/dt = 0.5 A/µs 450 mA IH TVJ = 25°C; VD = 6 V; RGK = ∞ 200 mA tgd TVJ = 25°C; VD = ½ VDRM IG = 0.5 A; diG/dt = 0.5 A/µs 2 µs RthJC RthJH per Thyristor; DC per Thyristor; DC; typ. dS dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration 0.75 V 1.23 mΩ 0,23 0.17 K/W K/W 11.2 mm 5.0 mm 50 m/s2 312 Dimensions in mm (1 mm = 0.0394") © 2003 IXYS All rights reserved 2-2