4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP AA4040SYC Features SUPER BRIGHT YELLOW Description SINGLE COLOR. The Super Bright Yellow devices is made with DH InGaAlP SUITABLE FOR ALL SMT ASSEMBLY AND (on GaAs substrate) light emitting diode chip. SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 500PCS / REEL RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB3283 REV NO: V.6 DATE: JUN/30/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP:1201000480 Selection Guide Part No. Dice Lens Type SUPER BRIGHT YELLOW (InGaAIP) AA4040SYC Iv (mcd) @ 20mA WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 50 120 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 588 nm IF=20mA Spectral Line Half-width Super Bright Yellow 28 nm IF=20mA C Capacitance Super Bright Yellow 25 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 125 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB3283 REV NO: V.6 DATE: JUN/30/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP:1201000480 Super Bright Yellow AA4040SYC SPEC NO: DSAB3283 REV NO: V.6 DATE: JUN/30/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP:1201000480 AA4040SYC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB3283 REV NO: V.6 DATE: JUN/30/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP:1201000480 PACKING & LABEL SPECIFICATIONS AA4040SYC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB3283 REV NO: V.6 DATE: JUN/30/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP:1201000480