3.0x2.5mm SURFACE MOUNT LED LAMP APBL3025SRSGCPR-F01 SUPER BRIGHT RED SUPER BRIGHT GREEN Features Description 3.0mmx2.5mm SMT LED, 1.4mm THICKNESS. LOW POWER CONSUMPTION. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. INNER LENS TYPE PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1334 REV NO: V.1 DATE: MAR/29/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000918-01 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type SUPER BRIGHT RED (GaAlAs) APBL3025SRSGCPR-F01 Viewing Angle Min. Typ. 36 100 7 20 2θ θ1/2 100° WATER CLEAR SUPER BRIGHT GREEN (GaP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red Super Bright Green λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 660 565 nm IF=20mA Super Bright Red Super Bright Green 640 568 nm IF=20mA Spectral Line Half-width Super Bright Red Super Bright Green 20 30 nm IF=20mA C Capacitance Super Bright Red Super Bright Green 45 15 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Red Super Bright Green 1.85 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Super Bright Green Units Power dissipation 100 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 155 140 mA Reverse Voltage 5 Operating/Storage Temperature V -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1334 REV NO: V.1 DATE: MAR/29/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000918-01 Super Bright Red /Super Bright Green APBL3025SRSGCPR-F01 SPEC NO: DSAF1334 REV NO: V.1 DATE: MAR/29/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1203000918-01 APBL3025SRSGCPR-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1334 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAR/29/2005 PAGE: 4 OF 4 DRAWN: B.H.LI ERP: 1203000918-01 D i g i t a l l y s i g n e d b y N I N G T I N G c n = N I N G T I N G , o = N I N G T I N G , c = C N D a t e : 2 0 0 5 . 0 3 . 2 9 1 0 : 1 0 : 5 6 + 0 8 '0 0 'R e a s o n : < n o n e >