T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP PRELIMINARY SPEC WP59SURKSGC Features Description HYPER RED SUPER BRIGHT GREEN UNIFORM LIGHT OUTPUT. The Hyper Red source color devices are made with DH LOW POWER CONSUMPTION. InGaAlP on GaAs substrate Light Emitting Diode. 3 LEADS WITH ONE COMMON LEAD. The Super Bright Green source color devices are made I.C. COMPATIBLE. with Gallium Phosphide Green Light Emitting Diode. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2656 REV NO: V.1 DATE: APR/20/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005970 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type HYPER RED (InGaAlP) WP59SURKSGC Viewing Angle Min. Typ. 480 1100 70 200 WATER CLEAR SUPER BRIGHT GREEN (GaP) 2 θ 1/2 24° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red Super Bright Green λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 650 565 nm IF=20mA Hyper Red Super Bright Green 635 568 nm IF=20mA Spectral Line Half-width Hyper Red Super Bright Green 28 30 nm IF=20mA C Capacitance Hyper Red Super Bright Green 35 15 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red Super Bright Green 1.95 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Super Bright Green Units Power dissipation 170 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 185 140 mA 5 5 V Reverse Voltage Operating/storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2656 REV NO: V.1 DATE: APR/20/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005970 WP59SURKSGC Hyper Red SPEC NO: DSAF2656 REV NO: V.1 DATE: APR/20/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005970 Super Bright Green SPEC NO: DSAF2656 REV NO: V.1 DATE: APR/20/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005970 PACKING & LABEL SPECIFICATIONS WP59SURKSGC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2656 REV NO: V.1 DATE: APR/20/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005970