1.6X0.8mm SMD CHIP LED LAMP P/N: APT1608YC Features z1.6mmX0.8mm zLOW zIDEAL SMT LED, 0.75mm THICKNESS. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light VIEW ING ANGLE. Emitting Diode. FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: zMOISTURE zRoHS Description POWER CONSUMPTION. zW IDE YELLOW 2000PCS / REEL . SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD0929 REV NO: V.7 DATE: MAR/25/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203005342 Selection Guide Part No. Dice APT1608YC Iv (mcd) [2] @ 20mA Lens Type YELLOW (GaAsP/GaP) Viewing Angle [1] Min. Typ. 2θ1/2 2.6 8 120° WATER CLEAR Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity/ Luminous Flux: +/-15% Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD[1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF[2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25°C Parameter Yellow Units 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0929 REV NO: V.7 DATE: MAR/25/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203005342 Yellow APT1608YC SPEC NO: DSAD0929 REV NO: V.7 DATE: MAR/25/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203005342 APT1608YC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD0929 REV NO: V.7 DATE: MAR/25/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203005342 PACKING & LABEL SPECIFICATIONS APT1608YC SPEC NO: DSAD0929 REV NO: V.7 DATE: MAR/25/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP:1203005342