3.2x1.6mm SMD CHIP LED LAMP PRELIMINARY SPEC P/N: APTL3216YC Features Description YELLOW 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. The Yellow source color devices are made with Gallium LOW POWER CONSUMPTION. Arsenide Phosphide on Gallium Phosphide Yellow Light WIDE VIEWING ANGLE. Emitting Diode. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAG3084 REV NO: V.1 DATE: MAR/28/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005434 Selection Guide Part No. Dice APTL3216YC Iv (mcd) [2] @ 20mA Lens Type YELLOW (GaAsP/GaP) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ θ1/2 4 15 70° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG3084 REV NO: V.1 DATE: MAR/28/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005434 Yellow APTL3216YC SPEC NO: DSAG3084 REV NO: V.1 DATE: MAR/28/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005434 APTL3216YC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAG3084 REV NO: V.1 DATE: MAR/28/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005434 PACKING & LABEL SPECIFICATIONS APTL3216YC SPEC NO: DSAG3084 REV NO: V.1 DATE: MAR/28/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1203005434