1.6x1.5mm BI-COLOR SMD CHIP LED LAMP APTB1615EYC-F01 HIGH EFFICIENCY RED YELLOW Features Description 1.6mmx1.5mm SMT LED, 0.7mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1102 REV NO: V.1 DATE: MAR/19/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203002084-01 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type Min. Typ. 4 12 2.6 8 HIGH EFFICIENCY RED (GaAsP/GaP) APTB1615EYC-F01 Viewing Angle WATER CLEAR YELLOW (GaAsP/GaP) 2 θ 1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength High Efficiency Red Yellow λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 627 590 nm IF=20mA High Efficiency Red Yellow 625 588 nm IF=20mA Spectral Line Half-width High Efficiency Red Yellow 45 35 nm IF=20mA C Capacitance High Efficiency Red Yellow 15 20 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red Yellow 2.0 2.1 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Yellow Units Power dissipation 105 105 mW DC Forward Current 30 30 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating/Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1102 REV NO: V.1 DATE: MAR/19/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203002084-01 APTB1615EYC-F01 High Efficiency Red SPEC NO: DSAF1102 REV NO: V.1 DATE: MAR/19/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203002084-01 Yellow SPEC NO: DSAF1102 REV NO: V.1 DATE: MAR/19/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203002084-01 APTB1615EYC-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1102 REV NO: V.1 DATE: MAR/19/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203002084-01