KINGBRIGHT CSC08

SURFACE MOUNT DISPLAY
Part Number: ACSC08-51SGWA
PRELIMINARY SPEC
Super Bright Green
Features
Description
z 0.8INCH DIGIT HEIGHT.
The Super Bright Green source color devices are made with
z LOW CURRENT OPERATION.
Gallium Phosphide Green Light Emitting Diode.
z EXCELLENT CHARACTER APPEARANCE.
z I.C. COMPATIBLE
z MECHANICALLY RUGGED.
z GRAY FACE,WHITE SEGMENT.
z PACKAGE: 200PCS/ REEL
z MOISTURE SENSITIVITY LEVEL : LEVEL 4.
z RoHS COMPLIANT.
Package Dimensions& Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAH3713
REV NO: V.2
DATE: JUN/07/2007
PAGE: 1 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Z.Z.YANG
ERP: 1351000568
Selection Guide
Part No.
Dice
ACSC08-51SGWA
Iv (ucd) [1]
@ 10mA
Lens Type
Super Bright Green (GaP)
WHITE DIFFUSED
Min.
Typ.
1900
7500
Description
Common Cathode, Rt.
Hand Decimal.
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
565
nm
IF=20mA
Super Bright Green
568
nm
IF=20mA
Spectral Line Half-width
Super Bright Green
30
nm
IF=20mA
C
Capacitance
Super Bright Green
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Green
2.2
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Green
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Green
Units
62.5
mW
DC Forward Current
25
mA
Peak Forward Current [1]
140
mA
5
V
Power dissipation
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH3713
REV NO: V.2
DATE: JUN/07/2007
PAGE: 2 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Z.Z.YANG
ERP: 1351000568
Super Bright Green
ACSC08-51SGWA
SPEC NO: DSAH3713
REV NO: V.2
DATE: JUN/07/2007
PAGE: 3 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Z.Z.YANG
ERP: 1351000568
ACSC08-51SGWA
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAH3713
REV NO: V.2
DATE: JUN/07/2007
PAGE: 4 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Z.Z.YANG
ERP: 1351000568
PACKING & LABEL SPECIFICATIONS
ACSC08-51SGWA
SPEC NO: DSAH3713
REV NO: V.2
DATE: JUN/07/2007
PAGE: 5 OF 5
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Z.Z.YANG
ERP: 1351000568