INFRA-RED EMITTING DIODES KP-3216F3C KP-3216SF4C Features ! WATER CLEAR LENS AVAILABLE. ! 3.2mmx1.6mm ! HIGH Description SMT LED, 1.1mm THICKNESS. F3 Made with Gallium Arsenide Infrared Emitting diodes. SF4 Made with Gallium Aluminum Arsenide Infrared POWER OUTPUT. ! PACKAGE: 2000PCS/REEL. Emitting diodes. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0431 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/21/2001 DRAWN: J.X.FU PAGE: 1 OF 5 Selection Guide Par t No . Dic e Po = (m W/s r ) @20m A L en s Ty p e V i ew i n g An g l e Min . Ty p . 2θ1/2 KP-3216F3C GaAs WATER CLEAR 0.5 1.2 120° KP-3216SF4C GaAlAs WATER CLEAR 0.5 1 12 0 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C It em P/N Sy m b o l Ty p . Max . Un it Co n d it io n Forward Voltage F3 S F4 VF 1.2 1.3 1.5 1.7 V IF=20mA Reverse Current F3 S F4 IR - 10 10 uA VR=5V Capacitance F3 S F4 C 90 90 - pF VF=0V, f=1MHz Peak Spectral Wavelength F3 S F4 λP 940 880 - nm IF=20mA Spectral Bandwidth F3 S F4 ∆λ 50 50 - nm IF=20mA Absolute Maximum Ratings at T)=25°°C It em Sy m b o l F3& SF4 Un it s Power Dissipation PT 100 mW Forward Current IF 50 mA 1.2 A Peak Forward Current[1] i Reverse Voltage VR 5 V Operating Temperature TA -40~ +85 °C TSTG -40~ +85 °C Storage Temperature FS Note: 1.1/100 Duty Cycle, 10us Pluse Width. SPEC NO: KDA0431 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/21/2001 DRAWN: J.X.FU PAGE: 2 OF 5 KP-3216F3C SPEC NO: KDA0431 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/21/2001 DRAWN: J.X.FU PAGE: 3 OF 5 KP-3216SF4C KP-3216F3C,KP-3216SF4C SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. SPEC NO: KDA0431 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/21/2001 DRAWN: J.X.FU PAGE: 4 OF 5 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0431 APPROVED: J.LU REV NO: V.1 CHECKED: DATE: SEP/21/2001 DRAWN: J.X.FU PAGE: 5 OF 5