TECHNICAL DATA CMOS BCD-to-7-Segment Latch Decoder Drivers KK4511B ICs KK4511B is usen in high-performance computing systems with low power consumption in portable measuring equipments, communication devices with power supply from telephone networks, instruments using alternative power supplies (solar batteries, thermal elements) etc. • Standard symmetrical output characteristic • Operating Voltage Range: 3.0 to 18 V • 100% testing for quiescent current at 20V • Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C • Noise margin (over full package temperature range): 1.0 V min @ 5.0 V supply 2.0 V min @ 10.0 V supply 2.5 V min @ 15.0 V supply N SUFFIX Plastic DIP D SUFFIX SOIC ORDERING INFORMATION KK4511BN Plastic DIP KK4511BD SOIC TA = - 55 to 125 °C for all packages PIN ASSIGNMENT B 01 16 VDD С 02 15 f LT 03 14 g BL 04 13 a LE/ STROBE 05 12 b D 06 11 c A 07 10 d VSS 08 09 e 1 KK4511B TRUTH TABLE Inputs LE BL X X X L L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H H H ______ LT L H H H H H H H H H H H H H H H H H H D X X L L L L L L L L H H H H H H H H X Outputs C X X L L L L H H H H L L L L H H H H X B X X L L H H L L H H L L H H L L H H X A X X L H L H L H L H L H L H L H L H X a H L H L H H L H L H H H L L L L L L b H L H H H H H L L H H H L L L L L L c H L H H L H H H H H H H L L L L L L d H L H L H H L H H L H L L L L L L L * Display e H L H L H L L L H L H L L L L L L L f H L H L L L H H H L H H L L L L L L g H L L L H H H H H L H H L L L L L L 8 blank 0 1 2 3 4 5 6 7 8 9 blank blank blank blank blank blank * * - Depends on BCD code previously, applied when LE=L X – Don't Care 2 KK4511B MAXIMUM RATINGS Symbol Parameter Recommended operating conditions Maximum ratings Unit VDD DC Supply Voltage min 3 max 18 min -0.5 max 20 V VI Input Voltage Range - - -0.5 VDD+0.5 V VO Output Voltage Range - - -0.5 VDD+0.5 V II DC Input Current - - - ±10 mА PD Power dissipation per package - - - 500* mW Ptot Power Dissipation per Output Transistor - - - 100 mW *PD for KK4511BN for temperature range - 55 - +100 °С and for ICs KK4511BD for temperature range - 55 - +65 °С PD for KK4511BN derate linearity at 12 mW/°C for temperature range +100 - +125°C. PD for KK4511BD derate linearity at 7 mW/°C for temperature range +65- +125°C. 3 KK4511B STATIC ELECTRICAL CHARACTERISTIC VDD, Symbol VIH Parameter Test conditions V Guaranteed Limits -55°C 25°C 125°C Units min max min max min max Minimum High- VO = 0.5 V or VDD-1.2 V Level Input VO = 1.0 V or VDD-1.2 V Voltage VO = 1.5 V or VDD-1.2 V 5.0 3.5 - 3.5 - 3.5 - 10 7.0 - 7.0 - 7.0 - 15 11 - 11 - 11 - Maximum Low VO = 0.5 V or VDD-1.2 V -Level Input VO = 1.0 V or VDD-1.2 V Voltage VO = 1.5 V or VDD-1.2 V 5.0 - 1.5 - 1.5 - 1.5 10 - 3.0 - 3.0 - 3.0 15 - 4.0 - 4.0 - 4.0 VOH High-Level VI = VSS or VDD Output Voltage 5.0 10 15 4.0 9.0 14.0 - 4.1 9.1 14.1 - 4.2 9.2 14.2 - V VOL Low-Level VI = VSS or VDD Output Voltage 5.0 10 15 - 0.05 0.05 0.05 - 0.05 0.05 0.05 - 0.05 0.05 0.05 V IIL Low -Level Input Current VI = VSS 18 - -0.1 - -0.1 - -1.0 µА IIH High -Level Input Current VI = VDD 18 - 0.1 - 0.1 - 1.0 µА IDD Quiescent VI = VSS or VDD Devices Current 5.0 10 15 20 - 5.0 10 20 100 - 5.0 10 20 100 - 150 300 600 3000 µА IOL Output Low (Sink) Current 5.0 10 15 0.64 1.6 4.2 - 0.51 1.3 3.4 - 0.36 0.9 2.4 - IOH Output High VI = VSS or VDD (Source) Current VOH = 2.5 V VOH = 4.6 V VOH = 9.5 V VOH = 13.5 V 5.0 -1.6 5.0 -0.46 10 -0.98 15 -3.33 - -1.3 -0.37 -0.8 -2.7 - -0.9 -0.26 -0.55 -1.9 - VIL VI = VSS or VDD VOL = 0.4 V VOL = 0.5 V VOL = 1.5 V V V mА mА 4 KK4511B DYNAMIC ELECTRICAL CHARACTERISTICS (CL=50 pF, RL = 200 kOhm, tLH = tHL ≤ 20 ns) VDD,, Symbol tPHL Parameter Propagation Delay Time Test conditions V Guaranteed Limits -55 °C 25 °C 125 °C min max min max min max Unit Time diagram on the figure 5.0 10 15 - 1040 420 300 - 1040 420 300 - 2080 840 600 Time diagram on the figure 5.0 10 15 - 700 350 250 - 700 350 250 - 1400 700 500 Time diagram on the figure 5.0 10 15 - 500 250 170 - 500 250 170 - 1000 500 340 Time diagram on the figure 5.0 10 15 - 1320 520 360 - 1320 520 360 - 2640 1040 720 Time diagram on the figure 5.0 10 15 - 800 350 300 - 800 350 300 - 1600 700 600 Time diagram on the figure 5.0 10 15 - 300 150 100 - 300 150 100 - 600 300 200 Time diagram on the figure 5.0 10 15 - 310 185 160 - 310 185 160 - 620 370 320 nс Time diagram on the figure 5.0 10 15 - 80 60 50 - 80 60 50 - 160 120 100 nс tSU Set-Up Time (A-D) as Time per LE diagram on the figure 5.0 10 15 150 70 40 - 150 70 40 - 300 140 80 - nс tH Hold Time (A - D) after LE Time diagram on the figure 5.0 10 15 0 0 0 - 0 0 0 - 0 0 0 - nс tWL LE Pulse Width Time diagram on the figure 5.0 10 15 400 160 100 - 400 160 100 - 800 320 200 - nс High-to-Low Level Input (A-D) Propagation Delay Time High-to-Low Level Input BL Propagation Delay Time High-to-Low Level Input LT tPLH Propagation Delay Time Low-to-High Level Input (A-D) Propagation Delay Time Low-to-High Level Input BL Propagation Delay Time Low-to-High Level Input LT tTHL Transition Time High-to-Low Level tTLH Transition Time Low-to-High Level nс nс 5 KK4511B CAPACITANCE VDD, Symbol Parameter CIN Input Capacitance Guaranteed Limits v min max - - 7.5 t HL pF t LH VDD 0.9 0.9 0.5 LE Unit 0.5 0.1 0.1 0V t WL t SU t LH tH VDD 0.9 0.9 B t HL 0.5 0.5 0.1 0.1 t PHL 0V t PLH VOH 0.9 0.9 0.5VDD a-g 0.1 tTHL 0.5VDD 0.1 tTLH VOL Time diagram when taking dynamic parameters 6 KK4511B N SUFFIX PLASTIC DIP (MS - 001BB) A Dimension, mm 9 16 B 1 8 Symbol MIN MAX A 18.67 19.69 B 6.1 7.11 5.33 C F L C -T- SEATING PLANE N G K D M H J 0.25 (0.010) M T NOTES: 1. Dimensions “A”, “B” do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. D 0.36 0.56 F 1.14 1.78 G 2.54 H 7.62 J 0° 10° K 2.92 3.81 L 7.62 8.26 M 0.2 0.36 N 0.38 D SUFFIX SOIC (MS - 012AC) Dimension, mm A 16 9 H B 1 G P 8 R x 45 C -TK D SEATING PLANE J 0.25 (0.010) M T C M F M Symbol MIN MAX A 9.8 10 B 3.8 4 C 1.35 1.75 D 0.33 0.51 F 0.4 1.27 G 1.27 H 5.72 J 0° 8° K 0.1 0.25 1. Dimensions A and B do not include mold flash or protrusion. M 0.19 0.25 2. Maximum mold flash or protrusion 0.15 mm (0.006) per side for A; for B ‑ 0.25 mm (0.010) per side. P 5.8 6.2 R 0.25 0.5 NOTES: 7