MICROSEMI MPL4701

MPP4201 – MPP4205, MPL4700
CONTROL DEVICES – MMSM PIN and Limiter Diodes
®
TM
RoHS Compliant
KEY FEATURES
DESCRIPTION
 Up to 10W incident RF power
handling
 Low parasitics
LP = 0.02nH Typical
CP = 0.04pF Typical
 Broadband Performance through
X-Band
 Available on Tape & Reel or on
Film Frame for pick & place
 Small, SOD 323 Footprint
APPLICATIONS
The MPP4000 series of PIN diodes can be used in RF circuits as an on/off
element, as a switch, or as a current controlled resistor in attenuators
extending over the frequency range from UHF through X band. Switch
applications include high speed switches (ECM systems), TR switches
channel or antenna selection switches (Telcom and WLAN applications),
duplexers (radar) and digital phase shifters (phased arrays). These diodes
are also used as passive and active limiters for low to moderate RF power
levels. Attenuator type applications include amplitude modulators, AGC
attenuators and power levelers.
The MPL4700 / MPL4701 series of Limiter diodes are design for low to
medium power receiver protection. The typical leakage output power for the
MPL4701 is +20 dbm versus +24 dbm for the MPL4700.
ABSOLUTE MAXIMUM RATINGS AT 25º C
(UNLESS OTHERWISE SPECIFIED)
 RoHS Compliant 1
www.MICROSEMI.com
This series of surface mount PIN and Limiter diodes utilize new and unique
monolithic MMSM technology. The technology is a package/device
integration accomplished at the wafer fabrication level. Since the cathode
and anode interconnections utilize precision photolithographic techniques
rather than wire bonds, parasitic package inductance is tightly controlled.
The package parasitics provide smooth non-resonant functionality through
X Band. This series of devices meets RoHS requirements per EU Directive
2002/95/EC.
1- These devices are supplied with
gold terminations.
APPLICATIONS/BENEFITS
 Receiver protection circuits
 Broadband Switching
 Economy Switching
 RF Attenuators
Rating
Symbol
Value
Unit
Maximum Leakage Current
@80% of minimum Rated VB
Operating Temperature
IR
0.5
uA
TOP
-55 to +150
ºC
Storage Temperature
TSTG
-65 to +150
ºC
IMPORTANT: For the most current data, visit: www.MICROSEMI.com
Specifications are subject to change. Consult factory for latest information.
Copyright  2006
Rev: 2009-01-19
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
MPP4200, MPL4700
These devices are ESD sensitive and must be handled use using ESD precautions.
Page 1
MPP4201 – MPP4205, MPL4700
CONTROL DEVICES – MMSM PIN and Limiter Diodes
®
TM
RoHS Compliant
.
DEVICE ELECTRICAL PARAMETERS @ 25C (unless otherwise specified)
Model Number
IR=10μA
(Min)
CT(pF)1
@-10V
(Max)
RS(Ω)[email protected]
0.01 mA
(Typ)
RS(Ω)2
@1 mA
RS(Ω)2
@10 mA
(Max)
RS(Ω)2
TL
@20 mA
(Max)
(Typ)
Application
MPP4201
70
0.20
2.5
150
Switching / Attenuation
MPP4202
50
0.15
2.8
50
Switching
3.0
MPP4203
50
0.10
MPP4204
25
0.15
MPP4205
70
0.15
MPL4700
MPL4701
25
15
250
7-16
0.15
0.20
www.MICROSEMI.com
VB (V)
50
Economy Switching
2.0
20
Switching
5.0
150
Attenuation
2.0
a
20
Receiver Protection
2.5
a
10
Receiver Protection
Notes
1- Capacitance is measured at f = 1 MHz.
2- Series Resistance (RS) is measured at f = 100 MHz. Devices are mounted in a package suitable for testing.
a. RS is measured at 1GHz for the MPL4700 and MPL4701 devices.
ELECTRICALS
Copyright  2006
Rev: 2009-01-19
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 2
MPP4201 – MPP4205, MPL4700
®
TM
CONTROL DEVICES – MMSM PIN and Limiter Diodes
RoHS Compliant
TYPICAL RS VS If @ 25C
www.MICROSEMI.com
10000.00
MPP4205
1000.00
Rs @ 100 MHz (ohms)
MPP4202/MPP4203
100.00
MPP4201
MPP4204
10.00
1.00
0.10
0.001
0.010
0.100
1.000
10.000
100.000
IF (mA)
PACKAGE STYLE 206
ELEC / MECH
Copyright  2006
Rev: 2009-01-19
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 3