MARL 690-930-66

690 series
features
• Ø9.6mm (3/8") mounting
• High Intensity LED Panel Indicator
• Black anodised aluminium housing
• Wide viewing angle
• Internal Potting
• 8 - 48Vac/dc
• Bi-polar product
• Sealed to IP67 - weather proof
specifications
Typical characteristics (Ta = 25°C)
Part
Colour
Number
Luminous
Intensity
(mcd)
Wave
Length
(nm)
Operating
Temp.
(°C)
Storage
Temp.
(°C)
De-rating
Vac/dc
Current
DC
(mA)
Voltage
Graphs
690-501-66
Red
8-48
10
600
630
-40 - +80
-40 - +100
D
690-521-66
Yellow
8-48
10
600
585
-40 - +80
-40 - +100
D
690-532-66
Green
8-48
10
800
515
-40 - +80
-40 - +100
F
690-930-66
Blue
8-48
10
230
465
-30 - +85
-40 - +100
U
690-940-66
Infrared
8-48
10
20mW/sr
940
-40 - +85
-40 - +85
-
690-946-66
Infrared
8-48
10
20mW/sr
880
-40 - +85
-40 - +85
-
690-997-66
White
8-48
10
1100
* See below
-30 - +85
-40 - +100
I
690-532-66-50
Green
8-48
5
800
515
-40 - +80
-40 - +100
F
690-532-66-51
Green
8-48
5
800
515
-40 - +80
-40 - +100
F
997F-C
*Typical emission colour White
x
0.31
-
-
-
y
0.32
-
-
-
^ = Voltage for 20mA product is Vf at 20mA, not Vopr
- Products must be de-rated according to the de-rating information. Each de-rating graph refers to
specific LEDs. Please refer to graphs on page 3.
- Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
- Intensities (lv) and colour shades of white (x, y co-ordinates) may vary between LEDs within a batch
to order
to order please contact us on: t: +44 (0)1229 582 430
f: +44 (0)1229 585 155 e: [email protected] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl
international limited for the intention of providing information, which must not be
copied or released to a third party without prior written consent from marl
international limited. the information provided does not constitute part of any order
or contract and should not be regarded as a representation relating to either
products or service. no responsibility can be assumed for inaccuracies or printing
errors. marl international limited reserve the right to alter without notice the
specification or any conditions of supply for product or service.
marl international limited - dsn 690 - version 2013-11-19-113750
BS EN ISO 9001:2008
approved manufacturer
page 1 of 4
high performance panel lamps
• UL Certified - Certificate Number E349017
690 series
technical data
Header
24.4
(0.961")
5
(0.197")
8.74+0.1
0
(0.344")
9.6+0.2
0
(0.375-0.378")
3
(0.375-0.378")
9.6+0.2
0
2.80
7.5 (0.295")
12 (0.472")
2.6
(0.102")
MOUNTING HOLE
(STANDARD)
MOUNTING HOLE
(ANTI-ROTATION)
Dimensions in mm (typical)
Not to scale
Mounting hole to be clean and burr free
housing material
Body
Nut
Panel Seal
Fresnel Lens
Encapsulation
Lock Washer
Termination Tags
Header
Black Anodised Aluminium
Bright Nickel Plated Brass
Viton
Polycarbonate
PC5430 Resin
Spring Steel Wavy Washer
Brass, Copper Flash, Silver Finish
Nylon 6
technical characteristics
Series
Max. Power
Dissipation
Max. Reverse
Voltage
Panel Cutout
Nut Mounting
Torque
Min. Mounting
Centres
Max. Panel
Thickness
690
480
50^
9.6 (3/8")
0.6 (0.44 lb/ft)
20 (0.780")
1.5-13.0
units
mW
Vdc
mm
Nm
mm
mm
* = Current Version
^ = Voltage Version
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: [email protected] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for
the intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service.
no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve
the right to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 690 - version 2013-11-19-113750
BS EN ISO 9001:2008
approved manufacturer
page 2 of 4
690 series
de-rating information
Derating Graph D
55
50
50
50
45
45
40
35
30
25
20
15
10
5
Forward Current IF (mA)
55
Forward Current IF (mA)
Forward Current IF (mA)
Derating Graph I
Derating Graph F
55
40
35
30
25
20
15
10
20.0
40.0
60.0
80.0
100.0
Ambient Temperature Ta (°C)
0
0.0
35
30
25
20
15
10
8.5
5
5
0
0.0
45
40
20.0
40.0
60.0
80.0
100.0
Ambient Temperature Ta (°C)
0
0.0
20.0
40.0
60.0
80.0
100.0
Ambient Temperature Ta (°C)
Derating Graph U
55
Forward Current IF (mA)
50
45
40
35
30
25
20
15
10
8.5
5
0
0.0
20.0
40.0
60.0
80.0
100.0
Ambient Temperature Ta (°C)
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: [email protected] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for
the intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service.
no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve
the right to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 690 - version 2013-11-19-113750
BS EN ISO 9001:2008
approved manufacturer
page 3 of 4
690 series
design considerations
Electro-Static Discharge (ESD)
Build up of electro-static discharge occurs in many situations involving people moving and handling products. The range of
possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual
situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood
that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and
assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing
technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have
changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and
despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015.
Power De-Rating
The forward voltage/ current value of an LED is dependant upon the ambient temperature of the environment in which it is
operated. Therefore, care must be taken to operate the LED at the correct voltage/ current values, depending upon the
ambient temperature. Consequently, a recommendation regarding operating voltages and currents is given in order to address
these temperature effects. This recommendation is termed ‘de-rating’. It is usual for forward voltages and currents to be
specified for ambient temperature of 25°C. However, because the values of these qualities vary with temperature, please refer
to the de-rating graphs for correct operation. Marl accept no liability for any product that is operated higher than the stated
voltage.
to order
to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155
e: [email protected] w: www.leds.co.uk
© marl international limited technical documentation has been designed by marl international limited for
the intention of providing information, which must not be copied or released to a third party without prior
written consent from marl international limited. the information provided does not constitute part of any
order or contract and should not be regarded as a representation relating to either products or service.
no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve
the right to alter without notice the specification or any conditions of supply for product or service.
marl international limited - dsn 690 - version 2013-11-19-113750
BS EN ISO 9001:2008
approved manufacturer
page 4 of 4