MJHK Series 3.2X5 Ceramic SMD Oscillator Low Profile SMD Package 32.768KHZ RoHS Compliant HCMOS Output Frequency 32.768KHZ Temperature Stability* (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature Range -55°C to +125°C Aging (+25°C ±3°C) ±3ppm / year max at +25ºC Supply Voltage (See Part Number Guide for Options) Supply Current 7mA max Waveform HCMOS Logic “0” 10% Vdd max Logic “1” 90% Vdd min Rise/Fall Time (10% to 90% of Supply Voltage) 0.2µs Symmetry (50% of waveform) 40%/60% Output Load 15pF or 10TTL Start-up Time 10mSec max Tri-State Operation Standby Power Consumption * Inclusive of Temperature., Load and Voltage Voh = 70% of Vdd min to Enable Output Vol = 30% max or grounded to Disable Output (High Impedance) 10µA max Mechanical & Environmental Detail Shock Solderability Solvent Resistance MIL-STD-883, Method 2002 Cond B MIL-STD-883, Method 2003 MIL-STD-202, Method 215 Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ = Internal Code = 4 Digit Date Code (Year / Week) = Denotes RoHS Compliant Line 2 = SYYWWL S Vibration MIL-STD-883, Method 2007, Cond A YYWW Gross Leak Test MIL-STD-883, Method 1014, Cond C L Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL Level 1 per IPC/JEDEC J-STD 20 Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice MJHK012811 A Pg 1of 2 Part Number Guide M JHK 32.768KHZ 3.2 X 5 Ceram ic SM D Frequency Stability 020 025 050 100 Supply Voltage 2 = +2.8 VDC 3 = +3.3 VDC = = = = ±20 ppm ±25 ppm ±50 ppm ±100 ppm Operating Tem perature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 1 Connection BLANK = No Connection H = Tri-State S = Stand-by Packaging Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Departm ent for any other Param eters or Options Mechanical Details 1.30 [.051] MAX 5.20 [.205] MAX MXX.XXX SYYWWL XXXXX 2.54 [.100] 3.40 [.134] MAX 3 4 2 1 2.54 [.100] 1.20 [.047] PIN PIN PIN PIN 2.20 [.087] 1.20 [.047] 1.20 [.047] 1 2 3 4 PIN OUTPUT NC, STANDBY, TRISTATE CASE GROUND OUTPUT SUPPLY VOLTAGE 1.40 [.055] SUGGESTED LAND PATTERN DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR RECOMMENDED Tape & Reel Dimensions PITCH 16.00 REEL DIA Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 PITCH TAPE WIDTH REEL DIA COUNT PIN 1 ORIENT. 4.00 [.157] 8.00 [.315] 180 [7.0] 1000 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Subject to change without notice MJHK012811 A Pg 2of 2