OX/OY Series Ceramic Composition 10% Tolerance 1.50" ±.118 38.0mm ±3* L *approx. 27mm for taped & reeled units Watts max.* 1 2 Series OX OY 0.031" nom. (0.8mm) D FeATureS SpeCiFiCATiOnS • Replaces 1 and 2 watt carbon composition resistors • Meets high energy density demands • High peak power • 10% Tolerance Material Terminals: Pb-free solder-coated axial Coating: Silicone ceramic Derating: Linear from 100% @ +70°C to 0% @ +200°C Operating Temp. Range: -40°C to +220°C Electrical Tolerance: ±10% standard Power Rating: Based on 70°C free air rating. Temperature Coefficient: -1300 ±300ppm/°C. C resistance min. max. 3.3 100K 3.3 1M Dimensions (in. / mm) Length L Length C Diameter D ±.039 (±1.0) max. ±.039 (±1.0) 0.65 / 16.5 0.748 / 19.0 0.217 / 5.5 0.748 / 19.0 0.886 / 22.5 0.276 / 7.0 Max Working volts 300 400 Joules max.** 50 80 Qty. per reel 1000 500 * at 70°C. **For a single impulse. The OX/OY Series of fixed ceramic resistors are ideal for circuitry associated with surges, high peak power or high energy. They offer enhanced performance in high voltage power supplies, R-C snubber circuits, and inrush limiters. The OX/OY resistors can often replace carbon composition resistors which can be difficult to source. performance characteriSticS Test Max Working Voltage Dielectric Strength Max Overload Voltage Max Pulse Voltage1 Pulse Tolerance, 100 pulses reSiSTAnCe TO puLSe 0.80% 0.60% ∆R/R 10 Kohms 0.40% 1 Kohm 0.20% 1See 100 ohms 0.00% 0 0.80% 100 1,000 Cycles 10,000 0.60% ∆R/R 2.5mm max. reeL DiMenSiOnS 13" 6.2mm ±.5 63mm ±1 3" 10 Kohms 2.88" 0.40% 0.20% 0.00% Maximum ∆r ∆ ±5% ±(2% + 0.05ohm) ±5% ±(2% ± 0.05 ohm) ±5% figures, left TApe DiMenSiOnS 20,000 DC 14KV see circuit for test conditions OX Series OY 400V 700V 800V 20KV 1640V @ 52µF, 70J/35 sec. Test Condition Life Test MIL-STD-202, Method 108 Short Time Overload 2x rated V, 5 sec ON @ 70°C see circuit for test conditions Resistance to Pulse1 20,000 cycles Thermal Shock MIL-STD-202, Method 107 Moisture Resistance 1000 hrs @ 40°C, 90 - 95% RH DC 20KV see circuit for test conditions OY Series OX 300V 500V 600V 14KV 1240V @ 52µF, 40J/ 35 sec. 10.16mm ±.80 ø 1.13" 0.80mm max. o r d e r i n G i n f o r m at i o n 1 Kohm 100 ohms 0 100 1,000 Cycles 10,000 20,000 1 sec. on / 1 sec. off RoHS Compliant Max. Pulse Voltage L1 14KV and 20KV values used in circuit as shown; full R.U.T. voltage not applied directly to resistor. 10 kohm 1000 pF L2 Tape & reel optional O X 8 2 G K E -TR L1 – L2 = 1mm max. Size T Tolerance Ohm V Value OX = 1W Example: K = 10% Standard OY = 2W 33G = 3.3 Ohms 330 = 33 Ohms 331 = 330 Ohms ––153KE ––183KE ––223KE ––273KE ––333KE ––393KE ––473KE ––563KE ––683KE ––823KE ––104KE 1 ––124KE ––154KE ––184KE ––224KE ––274KE ––334KE ––394KE ––474KE ––564KE ––684KE ––824KE ––105KE 2 120000 150000 180000 220000 270000 330000 390000 470000 560000 680000 820000 1 MEG Wattage OY– part no. Prefix Suffix OX– Ohmic value 15000 18000 22000 27000 33000 39000 47000 56000 68000 82000 100000 1 2 Wattage OY– ––182KE ––222KE ––272KE ––332KE ––392KE ––472KE ––562KE ––682KE ––822KE ––103KE ––123KE part no. Prefix Suffix OX– 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 Wattage Ohmic value 1 2 OY– ––221KE ––271KE ––331KE ––391KE ––471KE ––561KE ––681KE ––821KE ––102KE ––122KE ––152KE OX– 220 270 330 390 470 560 680 820 1000 1200 1500 Ohmic value 1 2 OY– OX– Ohmic value 1 2 Ohmic value Ohmite Mfg. Co. OY– OY– ––270KE ––330KE ––390KE ––470KE ––560KE ––680KE ––820KE ––101KE ––121KE ––151KE ––181KE OX– 1 2 OX– 27 33 39 47 56 68 82 100 120 150 180 part no. Prefix Suffix Wattage 56 part no. Prefix Suffix ––33GKE ––39GKE ––47GKE ––56GKE ––68GKE ––82GKE ––100KE ––120KE ––150KE ––180KE ––220KE Wattage 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 part no. Prefix Suffix Wattage part no. Prefix Suffix Ohmic value S ta n d a r d pa rt n u m b e r S f o r o x / o y S e r i e S 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected]