SLPOWER PW148RB

PW148RB
Universal 19.2 Watt Series
ITE / Switch Mode Power Supply
1 Year Warranty
•100-240 VAC Universal Input
•Single Output to 15W – 19.2W
•Eight Models Available from 5V to 48V
•Meets Safety Agency Requirements
•Complies with Class B EMI/RFI Regulations
•CE Compliant
•Impact Resistant Polycarbonate Enclosure
•Private Label Marking Available
•Modified and Custom Designs Also Available
• Meets ENERGY STAR Criteria Level IV and EISA Requirements — see reverse side for details
International Safety Standard Approvals
Specifications
Output Specifications
General Specifications
Line and Load Voltage Regulation Excluding cord
+/-1% Topology
Switching-Fixed Frequency Flyback
Ripple
% V p-p max. for output
1
current of >0.175A
Dielectric Withstand 3000VAC, 4250VDC Primary-Secondary
Transient Response
0.5ms for 50% Load Change Typical
Spacing >5mm Primary-Secondary
Leakage Current <250 uA
Protection Foldback Over-current
Protection
Short Circuit Protection
Efficiency Meets Energy Star Level IV
Input Specifications
Voltage EMI Class B
CE CE Compliant
Hold-up Time @120VAC
@240VAC
17ms, Typical
30ms, Typical
Storage Temp -30° C to 85° C
Approvals and Safety Standards
UL/cUL60950-1,
TUV:EN60950-1
Weight (excluding cord)
7 Ounces, 198 Grams
MTBF 400,000 Calculated Hours
Case and Dimension 3.74L x 2.13W x 1.26H (in)
95.0L x 54.0W x 32.0H (mm)
0° C to 40° C Case Material Black 94V0 Polycarbonate
Cord and Connectors .3ft 16AWG for 5V model, 6ft,
3
2 conductor, 18AWG, 20AWG,
22AWG for other models. Ault
#3 connector. Other connectors are also available.
100-240VAC -10%, +10%
Line Frequency 47-63Hz
Input Current 90VAC Input
0.6A max. Protection
Internal Primary Current Fuse,
Inrush Limiting
Environmental Specifications
Thermal Performance Operating temperature no derating convectional cooling Non vented case
Relative Humidity Non-condensing
5% to 95% Altitude 0-10,000 feet
SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com
PW148RB
Universal 19.2 Watt Series
ITE / Switch Mode Power Supply
Output Currents
Output
Voltage Min
Max
Ault Part Number
Max
Watts
PW148RB0503X01
5 V
0.00 A
3.00 A
15.0 W
PW148RB0903X01
9 V
0.00 A
2.00 A
18.0 W
PW148RB1203X01
12 V
0.00 A
1.50 A
18.0 W
PW148RB1503X01
15 V
0.00 A
1.20 A
18.0 W
PW148RB1803X01
18 V
0.00 A
1.00 A
18.0 W
PW148RB2403X01
24 V
0.00 A
0.75 A
18.0 W
PW148RB3303X01
33 V
0.00 A
0.54 A 18.0 W
PW148RB4803X01 48 V 0.00 A
0.40 A
19.2 W
Ault Part Number Key
PW148
R
B
48
03
X
01
Product Family Name
Manufacturing Location
Design Revision
Changes
Voltage
DC
Connector
Number
Input
Configuration/
Model Type
Standard
(no modifications
or special packaging)
Input Configuration
IEC320
w/ground
C14
(F)
IEC320
IEC320
w/ground
w/o ground
C14
C18
(F)(Q)
IEC320
N. America/ N. America/
Europe
Japan
w/o
ground
Japan
(M)
(B)
C18
(B)
(Q)
Europe
United
(M)
Kingdom
(G)
United
Australian
Kingdom
(E)
(G)
Australian
Shaver
(E)
C8
(N)
2007 Energy Independence and Security Act – EISA
he Energy Independence and Security Act of 2007 was passed in December
T
of 2007 and addresses minimum efficiency standards and standby levels
for Class A external power supplies that are 250 watts and under. This law
stipulates that external power supplies manufactured on July 1, 2008 and
beyond meet certain minimum efficiency and standby criteria as defined
below.
Minimum Efficiency Criteria
ctive mode is defined as when a power supply’s input is connected to line
A
voltage AC and its output is connected to a DC or AC load drawing a portion
of the product’s power output. Depending on the power rating for the power
supply, it must meet the minimum efficiency criteria outlined below.
Energy-Efficiency Criteria for Active Mode: output power on minimum average
adapter label efficiency percentage ≥ 0.50 * output power on adapter label 0 to ≤ less than 1 watt ≥ [0.09 * Ln (output power on adapter > 1 to ≤ 51 watts label )] + 0.50 ≥ 0.85
> 51 watts he power supply must also meet a requirement for when its input is
T
connected to a line voltage AC but its output is not connected to a load. Depending on the power output of the supply, it must keep its energy
consumption below the following values.
Energy Consumption Criteria for No Load Mode:
output power on maximum power consumption adapter label
in no-load mode ≤ 0.5 watts
0 to < 250 watts Shaver
C8
(N)
Specify the Input Configuration Code in your order.
Pin Connections
Pinout Code
Center contact: positive
Description
Switchcraft 760 plug or equivalent
Suggested Mating Switchcraft 712A jack or equivalent
Other Connectors are available by special order.
SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com
Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
Rev.06/09/08