Series AM30K-IZ 30 Watt | DC-DC Converter FEATURES: • • • • • Models Single output Model AM30K-1203SIZ AM30K-1205SIZ AM30K-1212SIZ AM30K-1215SIZ AM30K-1224SIZ AM30K-2403SIZ AM30K-2405SIZ AM30K-2412SIZ AM30K-2415SIZ AM30K-2424SIZ AM30K-4803SIZ AM30K-4805SIZ AM30K-4812SIZ AM30K-4815SIZ AM30K-4824SIZ AM30K-1203SH30IZ AM30K-1205SH30IZ AM30K-1212SH30IZ AM30K-1215SH30IZ AM30K-1224SH30IZ AM30K-2403SH30IZ AM30K-2405SH30IZ AM30K-2412SH30IZ AM30K-2415SH30IZ AM30K-2424SH30IZ AM30K-4803SH30IZ AM30K-4805SH30IZ AM30K-4812SH30IZ AM30K-4815SH30IZ AM30K-4824SH30IZ RoHS compliant Power modules for PCB mounting Capacitive loading up to 5500 µF (36-75V Input) Remote On/Off control Operating temperature range: -40 to +85ºC Input Voltage (V) 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 36-75 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 36-75 Models Dual output Model AM30K-1205DIZ AM30K-1212DIZ AM30K-1215DIZ AM30K-2405DIZ AM30K-2412DIZ AM30K-2415DIZ AM30K-4805DIZ www.aimtec.com F 051e R8.F Input Voltage (V) 9-18 9-18 9-18 18-36 18-36 18-36 36-75 Output Voltage (V) 3.3 5 12 15 24 3.3 5 12 15 24 3.3 5 12 15 24 3.3 5 12 15 24 3.3 5 12 15 24 3.3 5 12 15 24 Output Voltage (V) ±5 ±12 ±15 ±5 ±12 ±15 ±5 Output Current max (A) • • • • • Soft start High efficiency Standard package UVLO / OVLO Shutdown Thermal shutdown Ripple & Noise Typ. Isolation (VDC) Efficiency (%) 5.5 5 2.5 2 1.25 5.5 5 2.5 2 1.25 5.5 5 2.5 2 1.25 80 mV p-p 80 mV p-p 120 mV p-p 150 mV p-p 240 mV p-p 80 mV p-p 80 mV p-p 120 mV p-p 150 mV p-p 240 mV p-p 80 mV p-p 80 mV p-p 120 mV p-p 150 mV p-p 240 mV p-p 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 81 83 86 87 86 82 86 88 88 86 82 86 88 88 86 6 5 2.5 2 1.2 6 5 2.5 2 1.2 6 5 2.5 2 1.2 80 mV p-p 80 mV p-p 120 mV p-p 150 mV p-p 240 mV p-p 80 mV p-p 80 mV p-p 120 mV p-p 150 mV p-p 240 mV p-p 80 mV p-p 80 mV p-p 120 mV p-p 150 mV p-p 240 mV p-p 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 80 81 84 83 82 80 80 84 83 83 77 82 84 85 85 Ripple & Noise Typ. Isolation (VDC) Efficiency (%) 80 mV p-p 120 mV p-p 150 mV p-p 80 mV p-p 120 mV p-p 150 mV p-p 80 mV p-p 1500 1500 1500 1500 1500 1500 1500 83 86 87 86 88 86 86 Output Current max (A) ±2.5 ±1.25 ±1 ±2.5 ±1.25 ±1 ±2.5 Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30K-IZ 30 Watt | DC-DC Converter Models Dual output (continued) Model Input Voltage (V) AM30K-4812DIZ AM30K-4815DIZ AM30K-1205DH30IZ AM30K-1212DH30IZ AM30K-1215DH30IZ AM30K-2405DH30IZ AM30K-2412DH30IZ AM30K-2415DH30IZ AM30K-4805DH30IZ AM30K-4812DH30IZ AM30K-4815DH30IZ 36-75 36-75 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 Input Specifications Parameters 12 24 48 Filter Recommended input fuse (Slow Blow) Remote On/Off Control Absolute Maximum Rating Permissible absolute maximum duration Isolation Specifications Parameters Tested I/O voltage Resistance Voltage accuracy Short Circuit protection Short Circuit restart Over load protection Over voltage protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Voltage adjustment range Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Thermal shutdown www.aimtec.com F 051e R8.F 12 Vin 24 Vin 48 Vin On Off 12 Vin 24 Vin 48 Vin Conditions 3 sec Output Specifications General Specifications ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 Output Current max (A) ±1.25 ±1 ±3 ±1.25 ±1 ±3 ±1.25 ±1 ±3 ±1.25 ±1 Nominal Voltage range Parameters Output Voltage (V) Isolation (VDC) Efficiency (%) 120 mV p-p 150 mV p-p 80 mV p-p 120 mV p-p 150 mV p-p 80 mV p-p 120 mV p-p 150 mV p-p 80 mV p-p 120 mV p-p 150 mV p-p 1500 1500 3000 3000 3000 3000 3000 3000 3000 3000 3000 88 88 81 83 83 83 85 85 84 85 85 Typical Maximum 9-18 18-36 36-75 Units VDC π (Pi) Network 8A/250V 4A/250V 2A/250V 3.5 to 12VDC or open circuit 0 to 1.2VDC or short circuit between pin 2 and 4; typical idle current 3mA 20 40 VDC 80 2 hours Typical Maximum Typical Maximum Units Continuous Auto recovery Auto recovery works at 110% of rated output Zener diode clamp protection ±0.5 ±0.5 ±0.5 ±2 ±0.05 ±10 % % % % %/oC % 1500 & 3000 > 1000 Conditions HL-LL HL-LL 25-100% 25-100% Ripple & Noise Typ. ±2 Conditions Typical 100% load With derating above 70ºC 250 +105 Tel: +1 514 620 2722 2 of 5 Maximum -40 to +85 -55 to +105 95 +115 Units VDC MOhm % Units KHz o C o C o C o C Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30K-IZ 30 Watt | DC-DC Converter General Specifications (continued) Parameters Conditions Typical Maximum Units Cooling Free air convection Humidity 95 % Case material Nickel coated copper with non conductive base. Six Sided Shielded Weight 50 g Dimensions (L x W x H) Tolerance ±0.5mm 2.00 x 1.60 x 0.40 inches 50.80 x 40.60x 10.16 mm MTBF > 550 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) o Soldering Temperature 1.5 mm from case for 10 sec 260 C NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency approvals Standards CE EN 55022, EN 55024 class A Pin Out Specifications Pin 1 2 3 4 5 6 7 Single +V Input -V Input On/OFF Control No pin +V Output -V Output Trim Dual +V Input -V Input On/OFF Control +V Output Common -V Output Trim Dimensions 5.10 (0.20) 50.80 (2.00) 2 5 Bottom View 3 45.72 (1.80) 10.16 (0.40) www.aimtec.com F 051e R8.F Dimensions mm (inch) Case Tolerance ±0.50 (±0.02) Pin Pitch Tolerance ±0.35 (±0.014) 5.60 (0.22) Ø 1.00 (0.04) 6 7 Printed Face 2.54 (0.10) 10.16 10.16 10.16 (0.40) (0.40) (0.40) 1 5.10 (0.20) 40.60 (1.60) 7.62 10.16 5.08 (0.30) (0.40) (0.20) 17.78 (0.70) 4 Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30K-IZ 30 Watt | DC-DC Converter Derating 1500VDC Isolation Trimming D 400 LFM 85 ºC C 200 LFM 80 ºC B 100 LFM 75 ºC A Free Air 70 ºC B A C D Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 20 - 40 0 20 40 60 80 85 100 Ambient Temperature º C 3000VDC Isolation Free Air Convection 40º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C www.aimtec.com F 051e R8.F Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30K-IZ 30 Watt | DC-DC Converter Control ON/OFF pin connection example Single Output Dual Output Digital Control Circuit: Vpeak Control Voltage On / Off Control 0.5mA NPN 0V Ra = Vpeak – 0.6 DC/DC Converter -V input 0.5mA NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R8.F Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only