Series 600 DIP Headers with Coined Contacts FEATURES: • Aries offers a full line of DIP headers, available with either coined or screw machine contacts. Consult Data Sheet No. 12035 for screw machine contacts. • Snap-on, protective covers are available for all sizes shown below and accommodate .125 [3.18] to .750 [9.05] component heights. Consult Data Sheet No. 12033 for protective covers. • Body cavity design provides additional clearance for component mounting. SPECIFICATIONS: • Standard body material is black UL 94V-0 4/6 Nylon. • Coined contacts are Brass, 1/2 hard. • Contact plating: -T = 200u” [5.08μm] min. Matte Tin per ASTM B545-97 over 50u” [1.27μm] min. Nickel per QQ-N-290 Note: Aries specializes in custom design and production. In addition to the -G = 10u”[.25μm] Gold per MIL-G-45204 over 50u”[1.27 μm] standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the min. Nickel per QQ-N-290. -TL = 200u”[5.08μm]90/10 Tin/Lead per MIL-T-10727 Type I right to change product specifications without notice. over 50u” [1.27μm] min. Nickel per QQ-N-290. ORDERING INFORMATION • Contact current rating=2 Amps. XX-600-XX • Operating temperature=221°F [105°C] Tin plating, =257°F [125°C] Gold plating. No. of pins: Plating: • Fork contact accepts up to .025 [.64] diameter leads. .300 [7.62] centers: 4 thru 20 Series 0=Tin MOUNTING CONSIDERATIONS: .400 [10.16] centers: 22 0TL =Tin/Lead •Suggested PCB hole size=.035 ± .002 [.89 ± .05] dia. .600 [15.24] centers: 24, 28, 40 1=Gold All tolerances ± .005 [.13] unless otherwise specified ALL DIMENSIONS: “A”=(NO. OF PINS PER ROW X .100 [2.54]) + .050 [1.27] ”B”=(NO. OF PINS PER ROW - 1) X .100 [2.54] INCHES [MILLIMETERS] Pin style: 1=Fork pin 2=Post pin Consult Data Sheet No. 12033 for snapon protective covers. Consult Data Sheet No. 12035 for screw machine contacts. .400 [10.16] AND .600 [15.24] CENTERS BODY (with ribs) .300 [7.62] CENTERS BODY (with numbered pin positions, no ribs) Centers “C” .300 [7.62] .400 [10.16] .600 [15.24] Dim. “D” .395 [10.03] .495 [12.57] .695 [17.65] Dim. “E” .252 [6.40] .352 [8.94] .552 [14.02] Bristol, PA USA TEL: (215) 781-9956 FAX: (215) 781-9845 abc 12032 http://www.arieselec.com • [email protected] REV. G PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED