ARIES SJ2000

Series SP200 & SJ200 0.040 [1.02]
Shorting Plugs and Jacks
FEATURES
•These Shorting Plugs and Jacks are used in conjunction with Aries DIP Strips,
available separately, for your programming needs. Consult Data Sheet 16007 and
Data Sheet 16008 for details.
•Convenient handle for insertion and withdrawal.
• Jacks available in both RoHS and Sn/Pb versions
SHORTING JACK (SJ200) SPECIFICATIONS
•BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon
•PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00
•PIN BODY PLATING: 200μ [5.08μm] min. Sn per ASTM B545 Type 1 over 100μ
[2.54μm] min. Ni per SAE-AMS-QQ-N-290 -OR- 200μ [5.08μm] min. 93/7
Sn/Pb per ASTM B545 over 100μ [2.54μm] min. Ni per SAE-AMS-QQ-N-290
•4-FINGER COLLET CONTACT: Be-Cu per UNS C17200 ASTM-B194-01
•CONTACT PLATING: 30μ [0.76μm] min. Au per MIL-G-45204 over 50μ
[1.27μm] min. Ni per SAE-AMS-QQ-N-290
•CONTACT CURRENT RATING: 8 amps
•OPERATING TEMPERATURE: -67°F to 221°F [-55° to 105°C]
•INSERTION FORCE: 240 grams/pin
•WITHDRAWAL FORCE: 130 grams/pin
•NORMAL FORCE: 210 grams/pin, based on a 0.040 [1.02] dia. test lead
•ACCEPTS LEADS: 0.032-0.047 [0.81-1.19] in dia., 0.130-0.180 [3.30- 4.56] long
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
SHORTING PLUG (SP200) SPECIFICATIONS
•BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon
•PIN: Brass 260 1/4- or 1/2-hard
•PIN PLATING:10μ [0.25μm] Au per MIL-G-45204 over 50μ [1.27μm] Ni
ORDERING INFORMATION
per SAE-AMS-QQ-N-290
•CONTACT CURRENT RATING: 5 amps
•OPERATING TEMPERATURE: -67°F to 221°F [-55° to 105°C]
JACKS – Specify P/N SJ200 (RoHS) or P/N SJ200-TL (Sn/Pb)
ALL DIMENSIONS IN INCHES [MILLIMETERS]
ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED
which are used with Aries MALE DIP STRIPS, Series M40, see
DATA SHEET 16007 for details.
PLUGS – Specify P/N SP200 which is used with Aries FEMALE DIP
STRIPS, Series F40, see DATA SHEET 16008 for details.
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
WWW.ARIESELEC.COM • INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
16009
1 of 1
Rev. AB