DCCOM BR1JF

DC COMPONENTS CO., LTD.
R
RECTIFIER SPECIALISTS
BR1DF
THRU
BR1JF
TECHNICAL SPECIFICATIONS OF FAST RECOVERY SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER
VOLTAGE RANGE - 200 to 600 Volts
CURRENT - 1.0 Ampere
FEATURES
*
*
*
*
*
*
Ideal for automated placement
Low profile space
Low forward voltage grop
Low leakage current
High forward surge capability
Glass passivated junction
MBF
.106(2.70)
.090(2.30)
MECHANICAL DATA
*
*
*
*
*
*
Case: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Terminals: MIL-STD-202E, Method 208 guaranteed
Polarity: Symbols molded or marked on body
Mounting position: Any
Weight: 0.12 gram
.276(7.00)
.260(6.60)
.043(1.10)
.020(0.50)
.236(6.00)
.220(5.60)
.004(0.10)
Max.
.016(0.41)
.006(0.15)
.035(0.90)
.020(0.50)
.197(5.00)
.181(4.60)
.063(1.60)
.047(1.20)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
SYMBOL
BR1DF
BR1GF
BR1JF
UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
200
400
600
Volts
Maximum RMS Bridge Input Voltage
VRMS
140
280
420
Volts
Maximum DC Blocking Voltage
VDC
200
400
600
o
Maximum Average Forward Output Current at T A = 30 C
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC Method)
1.0
Amps
I FSM
30
Amps
VF
1.25
Volts
Maximum DC Forward Voltage Drop per Bridge
Element at 1.0A DC
o
Maximum Reverse Current at rated
@T A = 25 C
DC Blocking Voltage per element
@T A = 125 o C
Typical Junction Capacitance ( Note1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
NOTES : 1. Measured at 1 MHZ and applied reverse voltage of 4.0 volts.
2. On glass epoxy P.C.B. with 0.05 x 0.05" (1.3x1.3mm) copper pads.
5.0
IR
µAmps
100
Maximum reverse recovery time
at IF = 0.5A , IR = 1.0A , Irr = 0.25A
Volts
IO
trr
150
250
CJ
13
RθJ A
80
T J, T STG
-50 to + 150
nS
pF
0
C/W
0
C
RATING AND CHARACTERISTIC CURVES (BR05DF THRU BR05JF)
FIG. 1 - DERATING CURVE FOR OUTPUT
CURRENT
PEAK FORWARD SURGE CURRENT, (A)
AVERAGE FORWARD CURRENT, (A)
1.0
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
0.8
0.6
0.4
0.2
0
0
30
60
90
120
35
8.3ms Single Half Sine-Wave
JEDEC Method
30
25
20
15
10
0
150
1
10
AMBIENT TEMPERATURE, (oC)
NUMBER OF CYCLES AT 60 Hz
10
1.0
TJ = 25OC
0.1
Pulse Width = 300 µS
1% Duty Cycle
0.01
.4
.6
.8
1.0
1.2
INSTANTANEOUS FORWARD VOLTAGE, (V)
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT, (uA)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
.2
100
TJ= 125oC
10
1.0
TJ= 75oC
.01
TJ= 25oC
0.01
10
20
40
60
80
100
120
PERCENT OF RATED PEAK REVERSE
VOLTAGE, (%)
DC COMPONENTS CO., LTD.
R
100
140