ETC 32207710

Platinum Resistance Temperature Detector
L 1020
L series PRTDs are designed for large volume applications where long term stability, interchangeability and accuracy over
a large temperature range are vital. Typical applications are Automotive, White Goods, HVAC, Energy Management,
Medical and Industrial equipment.
Resistance R0
100 Ohm at 0°C
1000 Ohm at 0°C
DIN EN 60751
Class 1/3 B
Class A
Class B
Class 1/3 B
Class A
Class B
DIN EN 60751
F 0,1
F 0,15
F 0,3
F 0,1
F 0,15
F 0,3
Order Number
Plastic Box
32 207 585
32 207 579
32 207 708
32 207 586
32 207 581
32 207 710
The measuring point for the nominal resistance is defined at 8mm from the end of the sensor body.
DIN EN 60751 (according to IEC 751)
Temperature range
-50°C to +400°C (continuous operation)
Tolerance Class B:
-50°C to +400°C
Tolerance Class A:
-50°C to +300°C
Tolerance Class 1/3B:
0°C to +150°C
Temperature coefficient
TC = 3850 ppm/K
AgPd- wire
Lead lengths (L)
10mm ±1mm
Long- term stability
max. R0-drift 0.04% after 1000h at 400 °C
Vibration resistance
at least 40g acceleration at 10 to 2000 Hz,
depends on installation
Shock resistance
at least 100g acceleration with 8ms half sine wave,
depends on installation
Environmental conditions
unhoused for dry environments only
Insulation resistance
> 100 Mī— at 20°C; > 2 Mī— at 400°C
Self heating
0.2 K/mW at 0°C
Response time
water current (v = 0.4m/s):
air stream (v = 2m/s):
t0.5 = 0.12s
t0.9 = 0.30s
t0.5 = 6.0s
t0.9 = 20.0s
Measuring current
100ī—: 0.3 to 1.0mA
1000ī—: 0.1 to 0.3mA
(self heating has to be considered)
Other tolerances, values of resistance and wire
lengths are available on request.
We reserve the right to make alterations and technical data printed. All technical data serves as a guideline and does not guarantee
particular properties to any products.
Heraeus Sensor Technology USA
1901 Route 130
North Brunswick, NJ 08902
Phone 732-940-4400
Fax 732-940-4445
Email [email protected]
Name of document: 30910011 Index A
Status: 06/2010