ETC G3019

Multipurpose Enclosures
Specifications :
Polycarbonate material :
Moulded in
Operating temperature
Clear lid is available on request.
: Light grey.
: -40°C to 120°C.
High impact ABS material :
Moulded in
: Dark grey.
Suggested operating temperature : -20°C to 80°C.
The lid and base incorporate a tongue and groove sealing system with a neoprene gasket.
Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture and dust.
Designed to IP 65 of IEC 529 and nema 4 (dust and hoseproof).
Available with clear or light grey LIDS.
Internal guide slots for mounting PCB assemblies vertically.
Bosses on internal base allow fixing of PCB's horizontally or connection of terminals, etc into threaded brass inserts.
Lid fixing screw are M-4 stainless steel (nonmagnetic) into threaded brass inserts.
Specifications Table
External Dimensions
(mm)
Part Number
Box, ABS, IP65, Grey
64 × 58 × 35
G302
Box, ABS, IP65, Grey
115 × 65 × 40
G304
Box, ABS, IP65, Grey
115 × 65 × 55
G308
115 × 90 × 55
G311
Box, ABS, IP65, Grey
171 × 121 × 55
G313
Box, ABS, IP65, Grey
222 × 146 × 55
G317
Box, ABS, IP65, Grey
115 × 90 × 80
G331
Box, ABS, IP65, Grey
171 × 121 × 80
G340
Description
Colour
Material
Box, ABS, IP65, Grey
Dark Grey
ABS
www.element14.com
www.farnell.com
www.newark.com
Page <1>
13/05/11 V1.1
Multipurpose Enclosures
Specifications Table
External
Dimensions (mm)
Part Number
Box, ABS, IP65, Grey
195 × 80 × 55
G346
Box, ABS, IP65, Grey
222 × 146 × 75
G353
Box, ABS, IP65, Grey
52 × 50 × 35
G362
Box, ABS, IP65, Grey
82 × 80 × 55
G366
Box, ABS, IP65, Grey
160 × 80 × 55
G368
Box, ABS, IP65, Grey
200 × 120 × 75
G373
Box, ABS, IP65, 265 × 185 × 95mm
265 × 185 × 95
G378
120 × 120 × 60
G386
Box, ABS, IP65, Grey
120 × 120 × 90
G387
Box, ABS, IP65, Grey
160 × 160 × 60
G396
Box, ABS, IP65, Grey
160 × 160 × 90
G399
Box, ABS, IP65, 240 × 160 × 90mm
240 × 160 × 90
G3008
Box, ABS, IP65, 240 × 160 × 120mm
240 × 160 × 120
G3019
Box, ABS, IP65, 300 × 230 × 86mm
300 × 230 × 86
G3028
Box, ABS, IP65, 300 × 230 × 111mm
300 × 230 × 111
G3031
Box, ABS, IP65, 360 × 200 × 150mm
360 × 200 × 150
G3039
Description
Colour
Material
Box, ABS, IP65, Grey
Dark Grey
ABS
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011.
www.element14.com
www.farnell.com
www.newark.com
Page <2>
13/05/11 V1.1