STATEK CX3HGSM

CX3HGSM AT CRYSTAL
9.6 MHz to 250 MHz
High Shock, Low Profile, Miniature
Surface Mount AT Quartz Crystal
Fundamental Mode:
9.6 MHz - 250 MHz
DESCRIPTION
STATEK’s miniature CX3SM AT crystals in leadless ceramic
packages are designed for surface mounting on printed circuit
boards or hybrid substrates. These crystals are low profile and
have a small land pattern. These rugged crystals are designed
for applications requiring higher shock and vibration survival.
actual size
XX
X
X
S
glass lid
side view
ceramic lid
PACKAGE DIMENSIONS
FEATURES
D
High shock and vibration survival
Designed for surface mount applications using infrared,
vapor phase, or epoxy mount techniques.
Low profile (less than 1.5 mm available) hermetically
TOP
A
E
sealed ceramic package
BOTTOM
Excellent aging characteristics
Available with glass or ceramic lid
D
High shock and vibration resistance
E
B
Custom designs available
C
Full military testing available
Designed and manufactured in the USA
APPLICATIONS
Medical
Monitoring Equipment
Industrial, Computer & Communications
Instrumentation
TYPICAL
MAXIMUM
DIM
inches
mm
inches
mm
A
0.263
6.68
0.270
6.86
B
0.097
2.46
0.104
2.64
C
-
-
D
0.052
1.32
0.058
1.47
E
0.030
0.76
0.035
0.89
see below
Down-hole Data Recorder
Engine Control
Handheld Inventory Control
THICKNESS (DIM C) MAXIMUM
Telemetry
GLASS LID
Military & Aerospace
Communications
Smart Munitions
Timing Devices
CERAMIC LID
inches
mm
inches
mm
SM1
0.053
1.35
0.067
1.70
SM2/SM4
0.055
1.40
0.069
1.75
SM3/SM5
0.058
1.47
0.072
1.83
Surveillance Devices
TEM
C ERT I F I C
AT
IO
S
10182 Rev A
YS
N
IS O
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
90
01
SPECIFICATIONS
TERMINATIONS
Specifications are typical at 25OC unless otherwise noted.
Specifications are subject to change without notice.
Designation
SM1
SM2
SM3
SM4
SM5
Fundamental Frequency
10 MHz
32 MHz
155.52 MHz
Motional Resistance R1 (Ω)
60
25
10
Motional Capacitance C1 (fF)
2.8
6.2
4.0
Quality Factor Q (k)
95
30
30
Shunt Capacitance C0 (pF)
1.4
2.3
2.3
Calibration Tolerances1
± 100 ppm, or tighter as required
Load Capacitance
20 pF for f ≤ 50 MHz
2
Termination
Gold Plated
Solder Plated
Solder Dipped
Solder Plated (Lead Free)
Solder Dipped (Lead Free)
Max Process Temperature
260OC for 20 sec.
SUGGESTED LAND PATTERN
10 pF for f > 50 MHz
0.070 (1.78)
Drive Level
500 µW MAX for f ≤ 50 MHz
Frequency-Temperature
Stability1,3
± 50 ppm to ± 10 ppm (Commercial)
200 µW MAX for f > 50 MHz
0.120 (3.05)
± 100 ppm to ± 20 ppm (Industrial)
± 100 ppm to ± 30 ppm (Military)
Aging, first year
10 ppm MAX
Shock, survival
Up to 20,000 g, 0.3 ms, 1/2 sine
Vibration, survival5
20 g, 10-2,000 Hz swept sine
Operating Temp. Range
-10 C to +70 C (Commercial)
-40OC to +85OC (Industrial)
-55OC to +125OC (Military)
Storage Temp. Range
-55OC to +125OC
4
O
0.215 (5.46)
inches (mm)
EQUIVALENT CIRCUIT
C0
O
L1
C1
R1
Max Process Temperature 260OC for 20 sec.
R1 Motional Resistance L1 Motional Inductance
C1 Motional Capacitance C0 Shunt Capacitance
1. Other tolerances available. Contact factory.
2. Unless specified otherwise.
3. Does not include calibration tolerance. The characteristics of the frequency stability over temperature
follow that of the AT thickness-shear mode.
4. 10 ppm MAX for frequencies below 40 MHz. For tighter tolerances and higher frequencies contact
factory.
5. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available.
PACKAGING OPTIONS
• Tray Pack
• 16mm tape, 7” or 13” reels
Per EIA 481 (see Tape and Reel data sheet 10109)
HOW TO ORDER CX3HGSM AT CRYSTALS
CX3
S
“S” if special or
custom design.
Blank if Std.
HG1
HG1 = 10,000 g
HG2 = 20,000 g
C
C = Ceramic Lid
Blank = Glass Lid
SM1
–
32.0M
Frequency
M = MHz
SM1 = Gold Plated
SM2 = Solder Plated
SM3 = Solder Dipped
SM4 = Solder Plated (Lead Free)
SM5 = Solder Dipped (Lead Free)
,
100
/
Calibration
Tolerance
@ 25OC
(in ppm)
100
/
—
/
I
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
Frequency
Stability over
Temp. Range
(in ppm)
OR
—
/
—
/
200
Total
Frequency
Tolerance
(in ppm)
/
I
Operating Temp. Range:
C = -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S = Customer Specified
TEM
C ERT I F I C
AT
IO
S
10182 Rev A
YS
N
IS O
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
90
01