part number: description: date: June 28, 2012 rev: A page: 1 of 2 10-01065 Cable, 1830 mm, 5.5x2.1x10 mm 90° 5000133 dc plug to stripped tinned, 18 AWG, 30-00007 wire Specifications: connector description dc plug, 5.5x2.1xL18.5 mm, molding style, spring contacts, P/N 50-00133 overmold 30P, PVC, black, P/N 24-00006 strain relief 30P, PVC, black, P/N 23-00007 wire description 2C, 18 AWG, UL2468, 300V, 80C, 4.4 mm, VW-1, PVC, 48P, P/N 30-00007 cable outer diameter Ø4.4 mm cable color black cable length 1830 ± 50 mm rated current 7 A, 12 Vdc Notes: Function test: no open, no reversed polarity, no short circuit, no INT RoHS compliant Mechanical drawing: black wire Units: mm tolerance X: ±0.5 mm .X: ±0.3 mm striped wire .XX: ±0.05 mm applicable unless otherwise indicated in specification or on drawings Tensility International Corporation reserves the right to substitute parts which are functionally equivalent to the ones specified. Initial Date part number: description: 10-01065 Cable, 1830 mm, 5.5x2.1x10 mm 90° 5000133 dc plug to stripped tinned, 18 AWG, 30-00007 wire date: June 28, 2012 rev: A page: 2 of 2 Revision notes: Rev Date Description A June 28, 2012 initial release Specification Approval Spec sign-off verifies that you have reviewed the entire specification, tested a sample of the product, and confirm that it meets your requirements. This specification reflects the part as it will be ordered. Orders will not be processed until the specification pages have been initialed and the approval page has been signed. This specification is confidential and is not to be transmitted without prior approval from Tensility. SignatureTitle NameDate CompanyBranch