Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : LF 744825433 STROMKOMP. DROSSEL WE-CMB COMMON MODE CHOKE WE-CMB DATUM / DATE : 2006-07-24 A Mechanische Abmessungen / dimensions: A XL D B 7 A B C D E F G Wert / value Einheit / unit tol. 1 12 E G F C 6 mm mm mm mm mm mm mm 30,0 ± 0,5 18,6 ± 0,4 25,0 ± 0,5 15,0 ± 0,5 35,0 max. 5,0 ± 0,5 1,0 typ. B Elektrische Eigenschaften / electrical properties: Eigenschaften / properties Leerlauf-Induktivität / inductance DC-Widerstand / DC-resistance Nennstrom / nominal current Nennspannung / nominal voltage Testbedingungen / test conditions 10 kHz / 50µA LO 33,0 mH ±30% 1 @ 25°C RDC 210,0 mΩ max. N1 IDC 3,0 A max. UN 250 VAC typ. D Prüfgeräte / test equipment: 6 N2 12 7 E Testbedingungen / test conditions: 33% WAYNE KERR WK3260B/WK3265 für/for L0/LN und/and RDC Luftfeuchtigkeit / humidity: HP 34401 A für/for IN Umgebungstemperatur / temperature: +25°C Prüfspannung / testing voltage N1/N2 1500 V,50 Hz 5 mA / 2 sec. F Werkstoffe & Zulassungen / material & approvals G Eigenschaften / general specifications: Sockel / base: UL94V-0 Klimabeständigkeit/ climatic class: 40/125/21 Draht / wire: 2UEWF (155°C) Betriebstemp. / operating temperature: Kleber / glue: UL94V-2 Übertemperatur / temperature rise: -40°C - + 125°C Abstandhalter / spacer UL94V-0 It is recommended that the temperature of the part does < 55 K not exceed 125°C under worst case operating conditions. Freigabe erteilt / general release: .................................................................................. Datum / date .................................................................................. Geprüft / checked Kunde / customer .................................................................................. MST Version 6 06-07-24 MST Version 4 04-10-11 MST Version 3 04-07-06 MST Version 2 03-12-01 .................................................................................. MST Version 1 Unterschrift / signature Würth Elektronik Kontrolliert / approved Name Änderung / modification 03-03-07 Datum / date This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. D-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com SEITE 1 VON 1