NPN SILICON PLANAR MEDIUM POWER HIGH GAIN TRANSISTOR FXT690B ELECTRICAL CHARACTERISTICS (at Tamb = 25°C) PARAMETER SYMBOL MIN. Transition Frequency fT 150 TYP. MAX. UNIT CONDITIONS. MHz IC=50mA, VCE=5V f=50MHz Input Capacitance Cibo 200 pF VEB=0.5V, f=1MHz Output Capacitance Cobo 16 pF VCB=10V, f=1MHz Switching Times ton toff 33 1300 ns ns IC=500mA, IB!=50mA IB2=50mA, VCC=10V *Measured under pulsed conditions. Pulse width=300µs. Duty cycle ≤2% FXT690B ISSUE 1 MAY 94 FEATURES * 45 Volt VCEO * Gain of 400 at IC=1 Amp * Very low saturation voltage APPLICATIONS * Darlington replacement * Siren Drivers * Battery powered circuits * Motor drivers REFER TO ZTX690B FOR GRAPHS B C E E-Line TO92 Compatible ABSOLUTE MAXIMUM RATINGS. THERMAL CHARACTERISTICS PARAMETER SYMBOL Rth(j-amb)1 Rth(j-amb)2 Rth(j-case) Thermal Resistance:Junction to Ambient1 Junction to Ambient2 Junction to Case MAX. UNIT 175 116 70 °C/W °C/W °C/W Device mounted on P.C.B. with copper equal to 1 sq. Inch minimum. PARAMETER SYMBOL VALUE UNIT Collector-Base Voltage VCBO 45 V Collector-Emitter Voltage VCEO 45 V Emitter-Base Voltage VEBO 5 V Peak Pulse Current ICM 6 A Continuous Collector Current IC 2 A Practical Power Dissipation* Ptotp 1.5 W Ptot 1 5.7 W mW/°C -55 to +200 °C Power Dissipation at Tamb=25°C derate above 25°C Operating and Storage Temperature Range Tj:Tstg *The power which can be dissipated assuming the device is mounted in a typical manner on a P.C.B. with copper equal to 1 inch square minimum ELECTRICAL CHARACTERISTICS (at Tamb = 25°C) 2.0 C 1.5 Am 1.0 0.5 0 PARAMETER SYMBOL MIN. UNIT CONDITIONS. Collector-Base Breakdown Voltage V(BR)CBO 45 V IC=100µA Collector-Emitter Breakdown Voltage V(BR)CEO 45 V IC=10mA* D=0.5 Emitter-Base Breakdown Voltage V(BR)EBO 5 V IE=100µA D=0.2 Collector Cut-Off Current ICBO 0.1 µA VCB=35V 200 Thermal Resistance (°C/W) Max Power Dissipation - (Watts) 2.5 -40 -20 0 20 40 bie as e nt t te m em pe ra per tu re at u re 60 80 100 120 140 160 180 200 D=1 (D.C.) t1 D=t1/tP tP 100 D=0.1 Single Pulse 0 0.0001 0.001 0.01 0.1 1 10 100 T -Temperature (°C) Pulse Width (seconds) Derating curve Maximum transient thermal impedance 3-53 TYP. MAX. Emitter Cut-Off Current IEBO 0.1 µA VEB=4V Collector-Emitter Saturation Voltage VCE(sat) 0.1 0.5 V V IC=0.1A, IB=0.5mA* IC=1A, IB=5mA* Base-Emitter Saturation Voltage VBE(sat) 0.9 V IC=1A, IB=10mA* Base-Emitter Turn-On Voltage VBE(on) 0.9 V IC=1A, VCE=2V* Static Forward Current Transfer Ratio hFE 500 400 150 3-52 IC=100mA, VCE=2V* IC=1A, VCE=2V* IC=2A, VCE=2V* NPN SILICON PLANAR MEDIUM POWER HIGH GAIN TRANSISTOR FXT690B ELECTRICAL CHARACTERISTICS (at Tamb = 25°C) PARAMETER SYMBOL MIN. Transition Frequency fT 150 TYP. MAX. UNIT CONDITIONS. MHz IC=50mA, VCE=5V f=50MHz Input Capacitance Cibo 200 pF VEB=0.5V, f=1MHz Output Capacitance Cobo 16 pF VCB=10V, f=1MHz Switching Times ton toff 33 1300 ns ns IC=500mA, IB!=50mA IB2=50mA, VCC=10V *Measured under pulsed conditions. Pulse width=300µs. Duty cycle ≤2% FXT690B ISSUE 1 MAY 94 FEATURES * 45 Volt VCEO * Gain of 400 at IC=1 Amp * Very low saturation voltage APPLICATIONS * Darlington replacement * Siren Drivers * Battery powered circuits * Motor drivers REFER TO ZTX690B FOR GRAPHS B C E E-Line TO92 Compatible ABSOLUTE MAXIMUM RATINGS. THERMAL CHARACTERISTICS PARAMETER SYMBOL Rth(j-amb)1 Rth(j-amb)2 Rth(j-case) Thermal Resistance:Junction to Ambient1 Junction to Ambient2 Junction to Case MAX. UNIT 175 116 70 °C/W °C/W °C/W Device mounted on P.C.B. with copper equal to 1 sq. Inch minimum. PARAMETER SYMBOL VALUE UNIT Collector-Base Voltage VCBO 45 V Collector-Emitter Voltage VCEO 45 V Emitter-Base Voltage VEBO 5 V Peak Pulse Current ICM 6 A Continuous Collector Current IC 2 A Practical Power Dissipation* Ptotp 1.5 W Ptot 1 5.7 W mW/°C -55 to +200 °C Power Dissipation at Tamb=25°C derate above 25°C Operating and Storage Temperature Range Tj:Tstg *The power which can be dissipated assuming the device is mounted in a typical manner on a P.C.B. with copper equal to 1 inch square minimum ELECTRICAL CHARACTERISTICS (at Tamb = 25°C) 2.0 C 1.5 Am 1.0 0.5 0 PARAMETER SYMBOL MIN. UNIT CONDITIONS. Collector-Base Breakdown Voltage V(BR)CBO 45 V IC=100µA Collector-Emitter Breakdown Voltage V(BR)CEO 45 V IC=10mA* D=0.5 Emitter-Base Breakdown Voltage V(BR)EBO 5 V IE=100µA D=0.2 Collector Cut-Off Current ICBO 0.1 µA VCB=35V 200 Thermal Resistance (°C/W) Max Power Dissipation - (Watts) 2.5 -40 -20 0 20 40 bie as e nt t te m em pe ra per tu re at u re 60 80 100 120 140 160 180 200 D=1 (D.C.) t1 D=t1/tP tP 100 D=0.1 Single Pulse 0 0.0001 0.001 0.01 0.1 1 10 100 T -Temperature (°C) Pulse Width (seconds) Derating curve Maximum transient thermal impedance 3-53 TYP. MAX. Emitter Cut-Off Current IEBO 0.1 µA VEB=4V Collector-Emitter Saturation Voltage VCE(sat) 0.1 0.5 V V IC=0.1A, IB=0.5mA* IC=1A, IB=5mA* Base-Emitter Saturation Voltage VBE(sat) 0.9 V IC=1A, IB=10mA* Base-Emitter Turn-On Voltage VBE(on) 0.9 V IC=1A, VCE=2V* Static Forward Current Transfer Ratio hFE 500 400 150 3-52 IC=100mA, VCE=2V* IC=1A, VCE=2V* IC=2A, VCE=2V*