ST207E ± 15KV ESD PROTECTED 5V RS-232 TRANSCEIVER ■ ■ ■ ■ ■ ESD PROTECTION FOR RS-232 I/O PINS: ± 15 KV HUMAN BODY MODEL 230kbpsDATE RATE GUARANTEED SLEW RATE 3V/µs (Min) OPERATES FROM A SINGLE 5V POWER SUPPLY PACKAGED IN SO-24, SSO-24 AND TSSOP24 PACKAGES DESCRIPTION The ST207E is a 5 driver and 3 receiver devices designed for RS-232 and V.28 communications in harsh enviroments. Each transmitter output and receiver input is protected against ±15KV electrostatic discharge (ESD) shocks. The drivers and receivers of the ST207E meet all EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120Kbps, when loaded in accordance with the EIA/TIA-232E specification. The ST207E operates with four 0.1µF capacitors. It cames in 24-pin SO and TSSOP packages. D (Micro Package Large) P (SSOP Package) T (TSSOP Package) ORDER CODES T ype Temperature Range Packag e Co mmen ts ST207ECD 0 to 70 C SO-24 (Tube) 33 parts per tube / 25 tube per box ST207EBD -40 to 85 oC SO-24 (Tube) 33 parts per tube / 25 tube per box ST207EAD -40 to 125 oC SO-24 (Tube) 33 parts per tube / 25 tube per box ST207ECDR 0 to 70 oC SO-24 (Tape & Reel) 1000 parts per reel o o ST207EBDR -40 to 85 C SO-24 (Tape & Reel) 1000 parts per reel ST207EADR -40 to 125 oC SO-24 (Tape & Reel) 1000 parts per reel ST207ECTR 0 to 70 oC TSSOP24 (Tape & Reel) 2500 parts per reel 2500 parts per reel o ST207EBTR -40 to 85 C TSSOP24 (Tape & Reel) ST207EATR -40 to 125 oC TSSOP24 (Tape & Reel) 2500 parts per reel ST207ECPR 0 to 70 oC SSOP24 (Tape & Reel) 1350 parts per reel ST207EBPR -40 to 85 C SSOP24 (Tape & Reel) 1350 parts per reel ST207EAPR -40 to 125 oC SSOP24 (Tape & Reel) 1350 parts per reel December 2001 o 1/9 ST207E PIN CONFIGURATION PIN DESCRIPTION 2/9 PIN No SYMBOL NAME AND F UNCTION 1 T3OUT RS-232 Driver Output 2 T1OUT RS-232 Driver Output 3 T2OUT RS-232 Driver Output 4 R1IN RS-232 Receiver Input 5 R1OUT 6 T2IN TTL/CMOS Driver Input. Internal Pull-up to VCC 7 T1IN TTL/CMOS Driver Input. Internal Pull-up to VCC 8 GND Ground 9 VCC 4.75V to 5.25V Supply Voltage 10 C 1+ Terminal For Positive Charge-pump Capacitor 11 V+ 2V CC Generated By The Charge Pump TTL/CMOS Receiver Output 12 C1- Terminal For Negative Charge-pump Capacitor 13 C 2+ Terminal For Positive Charge-pump Capacitor 14 C2- Terminal For Negative Charge-pump Capacitor 15 V- -2V CC Generated By The Charge Pump 16 R3IN 17 R3OUT RS-232 Receiver Input TTL/CMOS Receiver Output 18 T3IN TTL/CMOS Driver Input. Internal Pull-up to VCC 19 T4IN TTL/CMOS Driver Input. Internal Pull-up to VCC 20 T5OUT 21 T5IN 22 R2OUT 23 R2IN RS-232 Receiver Input 24 T4OUT RS-232 Driver Output RS-232 Driver Output TTL/CMOS Driver Input. Internal Pull-up to VCC TTL/CMOS Receiver Output ST207E ABSOLUTE MAXIMUM RATINGS (Note 1) Symbol VCC Parameter Supply Voltage Value Unit -0.3 to 6 V V+ Extra Positive Voltage (VCC - 0.3) to 14 V V- Extra Negative Voltage -14 to 0.3 V TIN Transmitter Input Voltage Range RIN Receiver Input Voltage Range TOUT Transmitter Output Voltage Range R OUT Receiver Output Voltage Range TSCTOUT Tstg -0.3 to (VCC + 0.3) V ±30 V (V- - 0.3) to (V+ + 0.3) V -0.3 to (VCC + 0.3) V Short Circuit Duration on TOUT Continuous Storage Temperature Range -65 to +150 o C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. ESD PERFORMANCE: TRANSMITTER OUTPUTS, RECEIVER INPUTS Symb ol Parameter T est Con ditio ns Value Min. T yp. Un it Max. ESD ESD Protection Voltage Human Body Model ±15 kV ESD ESD Protection Voltage IEC-1000-4-2 Contact Discharge ±6 kV ELECTRICAL CHARACTERISTICS (C1 -C4 = 0.1µF, VCC = 5V ± 5% TA = Min to Max, unless otherwise specified. Typical Valus are referred to TA = 25 oC) Symb ol Parameter T est Con ditio ns Value Min. ISUPPLY VCC Power Supply Current No Load, TA = 25 oC Un it T yp. Max. 2 5 mA RECEIVER ELECTRICAL CHARACTERISTICS (C1 -C4 = 0.1µF, VCC = 5V ± 5% TA = Min to Max, unless otherwise specified. Typical Valus are referred to TA = 25 oC) Symb ol Parameter T est Con ditio ns Value Min. VRIN Receiver Input Voltage Operating Range VRIL Input Threshold Low VRIH VRIHYS TA = 25 oC, VCC = 5 V TA = 25 C, VCC = 5 V Input Hysteresis VCC = 5 V, no hysteresis in shutdown Input Resistance VOL Output Voltage Low VOH Output Voltage High o TA = 25 C, VCC = 5 V IOUT = -1mA Max. 30 V 0.8 1.2 1.7 2.4 V 0.2 0.5 1 V 3 5 7 KΩ 0.4 V o Input Threshold High R RIN T yp. -30 Un it 3.5 VCC-0.4 V V 3/9 ST207E TRANSMITTER ELECTRICAL CHARACTERISTICS (C1 -C4 = 0.1µF, VCC = 5V ± 5% TA = Min to Max, unless otherwise specified. Typical Valus are referred to TA = 25 oC) Symb ol Parameter T est Con ditio ns VTOUT Output Voltage Swing ROUT Transmitter Output Resistance VCC = V+ = V- = 0V ISC Transmitter Output Short Circuit Current IIL Input Pull-Up Current VTIL Input Logic Threshold Low VTIH Input Logic Threshold High All drivers loaded with 3KΩ to GND VOUT = ± 2 V Value Min. T yp. ±5 ±8.5 Un it Max. V Ω 300 TIN = 0 V ±18 ±60 mA 15 200 µA 0.8 V 2 V TIMING CHARACTERISTICS (C1 -C4 = 0.1µF, VCC = 5V ± 5% TA = Min to Max, unless otherwise specified. Typical Valus are referred to TA = 25 oC) Symb ol DR Parameter Maximum Data Rate T est Con ditio ns RL = 3KΩ to 7 KΩ, one transmitter switching CL = 50pF to 1000pF CL = 50pF to 150pF tPLHR tPHLR Receiver Propagation Delay tPLHT tPHLT Transmitter Propagation Delay RL = 3KΩ, CL = 2500pF all transmitters loaded SR 4/9 Transition-Region Slew Rate Value Min. T yp. 150 230 240 300 All drivers loaded with 3KΩ to GND TA =25 oC VCC = 5V RL = 3KΩ to 7 KΩ, CL = 50pF to 1000pF measure from -3V to 3V or 3V to -3V 3 Un it Max. kbps kbps 0.2 10 µs 2 3 µs 7 30 V/µs ST207E APPLICATION CIRCUITS (note 1, note 2) Note 1: C1-4 capacitors can even be 1 µF ones. Note 2: C1-4 canbe common or biased capacitors. Capacitance Value (µF) DEVICES ST207E C1 C2 C3 C4 C5 0.1 0.1 0.1 0.1 0.1 5/9 ST207E SO-24 MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. A MIN. TYP. MAX. 2.65 a1 0.10 0.104 0.20 a2 0.004 0.007 2.45 0.096 b 0.35 0.49 0.013 0.019 b1 0.23 0.32 0.009 0.012 C 0.50 0.020 c1 45 (typ.) D 15.20 15.60 0.598 0.614 E 10.00 10.65 0.393 0.420 e 1.27 0.05 e3 13.97 0.55 F 7.40 7.60 0.291 0.299 L 0.50 1.27 0.19 0.050 S 8 (max.) L s e3 b1 e a1 b A a2 C c1 E D 13 1 12 F 24 P013T 6/9 ST207E SSOP24 MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 2.00 0.079 A1 0.25 0.010 A2 1.51 2.00 0.059 b 0.25 0.35 0.010 c 0.10 0.35 0.004 0.014 D 8.35 9.35 0.329 0.368 E 7.6 8.7 0.299 0.343 E1 5.02 6.22 0.198 0.30 6.10 e 0.079 0.012 0.240 0.65 BSC K 0o L 0.25 A 0.014 0.245 0.0256 BSC 0.50 10o 0o 10o 0.80 0.010 0.020 0.031 A2 A1 b K e L E c D E1 PIN 1 IDENTIFICATION 1 7/9 ST207E TSSOP24 MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. A MIN. MAX. 1.1 0.433 A1 0.05 0.10 0.15 0.002 0.004 0.006 A2 0.85 0.9 0.95 0.335 0.354 0.374 b 0.19 0.30 0.0075 0.0118 c 0.09 0.2 0.0035 0.0079 D 7.7 7.8 7.9 0.303 0.307 0.311 E 6.25 6.4 6.5 0.246 0.252 0.256 E1 4.3 4.4 4.48 0.169 0.173 0.176 e 0.65 BSC 0.0256 BSC K 0o 4o 8o 0o 4o 8o L 0.50 0.60 0.70 0.020 0.024 0.028 A A2 A1 b K e E1 PIN 1 IDENTIFICATION 1 L E c D 8/9 TYP. ST207E Information furnished is believed to be accurate and reliable. However, STMicroelectronic s assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems withoutexpress written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2001 STMicroelectronics – Printed in Italy – All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com . 9/9